Premium Information is available for this item - Upgrade for $1 a day
3110-01-028-4470
Duplex Ball Bearing
3110010284470 010284470 203-034-0001
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting. View more Duplex Ball Bearing
May 2023
3
Marketplace 3110-01-028-4470
Request a Quotation from participating marketplace vendors
Related Documents 3110-01-028-4470 1+ Documents (More...)
BEARING,BALL,DUPLEX 3 EA NS Request Quotation Updated Every Day 3110-01-028-4470 RQST NE Updated
Every Day 3110-01-028-4470 RQST Updated Every Day 3110-01-028-4470 RQST NE Related Documents 3110-01
Restrictions 3110-01-028-4470
3110-01-028-4470 is a Duplex Ball Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3110-01-028-4470
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-028-4470
- National Security Agency (DGX1)
- Effective Date:
- 1 Jul 2005
Approved Sources 3110-01-028-4470
- Part Number
- Manufacturer
- Status
- 203-034-0001
- Manufacturer
- 95542 - Northrop Grumman Systems Corporation (Active)
- Source Control
- Source Control
- 203-034-0001
- 78118 - Mpb Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 3110-01-028-4470
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Bearing Preload Rating [CTHQ]
- 3.0 Pounds Nominal
- Bore Diameter [ABXV]
- 0.7498 Inches Minimum And 0.7500 Inches Maximum
- Features Provided [CBBL]
- Aligning Ring
- Material [MATT]
- Plastic Phenolic Retainer
- Material [MATT]
- Steel Comp 440A Ball
- Material [MATT]
- Steel Corrosion Resisting Shield
- Load Direction [AGZC]
- Angular
- Lubrication Material Document And Classification [LMDC]
- Mil-G-23827 Mil Spec Single Material Response
- Lubrication Material [ADZG]
- Grease
- Material Document And Classification [MDCL]
- Aisi Assn Std Single Material Response Ball
- Shield Quantity [AGYK]
- 1
- Overall Outside Diameter [ADGA]
- 1.1871 Inches Minimum And 1.1875 Inches Maximum
- Overall Width [ABMK]
- 0.4980 Inches Minimum And 0.5000 Inches Maximum
- Style Designator [STYL]
- Counterbored Outer Rings, Non-Separable, Tandem Mounting
- Surface Finish [AGYE]
- Unground
DLA Procurement Analysis 3110-01-028-4470
Management Data 3110-01-028-4470
Similar Supply Items to 3110-01-028-4470
Freight Information 3110-01-028-4470
3110-01-028-4470 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-028-4470 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-028-4470 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-028-4470 is not classified as a special type of cargo when transported by water. 3110-01-028-4470 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3110-01-028-4470 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: