Premium Information is available for this item - Upgrade for $1 a day
3110-00-946-2824
Duplex Ball Bearing
3110009462824 009462824 4228 SR3RH-D114 972082-0001 SR3-2203D114
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting. View more Duplex Ball Bearing
Managed by United States
NSN Created on 16 Mar 1966
Data Last Changed
May 2023
May 2023
NATO Update Count
17
17
NATO Data Quality
Marketplace 3110-00-946-2824
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 3110-00-946-2824 5+ Documents (More...)
https//www.nsnlookup.com /cage New Hampshire Ball Bearings Inc (CAGE Code 83086) 23 Mar 1966 3110-00-946-2824
5935-14-402-3475 5935144023475 144023475 is an item specifically designed to be placed around that portion of a connector, receptable, electrical or connector, plug, electrical which contains the facilities for attaching wires or cables.it may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device.it may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
5935-14-414-7453 5935144147453 144147453 is an item specifically designed to be placed around that portion of a connector, receptable, electrical or connector, plug, electrical which contains the facilities for attaching wires or cables.it may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device.it may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
5935-14-404-8651 5935144048651 144048651 is a device specifically designed to fully or partially inclose an electrical connector to protect its mating end from mechanical damage. excludes cap, electrical; cap, protective, dust and moisture seal; and guard, electrical connector. see also cover and guard, electrical connector; shell, electrical connector; and shield, electrical connector.
5935-14-406-3984 5935144063984 144063984 is an item specifically designed to be placed around that portion of a connector, receptable, electrical or connector, plug, electrical which contains the facilities for attaching wires or cables.it may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device.it may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
Restrictions 3110-00-946-2824
3110-00-946-2824 is a Duplex Ball Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-00-946-2824
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-00-946-2824
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
- US Navy (N9BG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTKE
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3110-00-946-2824
- Part Number
- Manufacturer
- Status
- 4228
- Manufacturer
- 83086 - New Hampshire Ball Bearings Inc (Active)
- Primary Buy
- Primary Buy
- SR3RH-D114
- 40920 - Mpb Corp (Active)
- Primary Buy
- Primary Buy
- SR3-2203D114
- 40920 - Mpb Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 972082-0001
- 06481 - Northrop Grumman Systems Corporation (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 3110-00-946-2824
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Bearing Preload Rating [CTHQ]
- 1.0 Pounds Nominal
- Bore Diameter [ABXV]
- 0.1875 Inches Nominal
- Material [MATT]
- Steel Corrosion Resisting Overall
- Internal Clearance [AKVV]
- 0.0005 Inches Minimum Radial And 0.0008 Inches Maximum Radial
- Load Direction [AGZC]
- Radial
- Retainer Fabrication Method [AGYF]
- Pressed
- Shield Quantity [AGYK]
- 1
- Overall Outside Diameter [ADGA]
- 0.5000 Inches Nominal
- Overall Width [ABMK]
- 0.3124 Inches Nominal
- Special Features [FEAT]
- Bearings Mounted With Unshielded Sides Together,Starting Torque 5Gm Cm
- Standard Tolerance Designation [CTFZ]
- Abec No.7
- Style Designator [STYL]
- Non-Loading Groove, Non-Separable, Tandem Mounting
- Surface Finish [AGYE]
- Ground
DLA Procurement Analysis 3110-00-946-2824
Management Data 3110-00-946-2824
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3110-00-946-2824
3110-12-343-0446 3110-21-870-2318 3110-01-140-5801 3110-01-525-0964 3110-13-121-1620 3110-12-186-3025 3110-12-191-2848 3110-99-654-1179 3110-99-145-9224 3110-00-653-6003 3110-00-756-1610 3110-00-156-6754 3110-00-156-8142 3110-00-196-5899 3110-00-227-2149 3110-00-848-5004 3110-00-796-7262 3110-01-132-1127
Freight Information 3110-00-946-2824
3110-00-946-2824 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-00-946-2824 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-00-946-2824 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-00-946-2824 is not classified as a special type of cargo when transported by water. 3110-00-946-2824 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3110-00-946-2824
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3110-00-946-2824 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: