Premium Information is available for this item - Upgrade for $1 a day
3110-00-796-2720
Rod End Roller Bearing
3110007962720 007962720 134HM10028-1
A special single or multiple-row roller bearing, rigid or self-aligning, and constructed with either inside threaded, plain hollow, maile threaded, or solid shank. View more Rod End Roller Bearing
May 2023
3
Marketplace 3110-00-796-2720
Request a Quotation from participating marketplace vendors
Related Documents 3110-00-796-2720 2+ Documents (More...)
/fsg-48/fsc-4820/us
Rod End Roller Bearing 3110007962720 3110-00-796-2720 3110007962720 007962720 is a special single
Restrictions 3110-00-796-2720
3110-00-796-2720 is a Rod End Roller Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3110-00-796-2720
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-00-796-2720
- US Army (A919)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- A180
Approved Sources 3110-00-796-2720
- Part Number
- Manufacturer
- Status
- 134HM10028-1
- Manufacturer
- 26512 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 3110-00-796-2720
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Alignment Type [AGZA]
- Self-Aligning
- Bore Diameter [ABXV]
- 0.5618 Inches Minimum And 0.5625 Inches Maximum
- Features Provided [CBBL]
- Aligning Ring
- Material Document And Classification [MDCL]
- Mil-S-5000 Mil Spec Single Material Response Rod End Body
- Material [MATT]
- Steel Comp E52100 Alignment Ring
- Material [MATT]
- Steel Comp E52100 Inner Ring
- Material [MATT]
- Steel Comp E52100 Outer Ring
- Material [MATT]
- Steel Comp E52100 Roller
- Material [MATT]
- Steel Comp 4340 Rod End Body
- Nominal Thread Size [CQJX]
- 1.125 Inches
- Outer Ring Width [AGVT]
- 0.7810 Inches Minimum And 0.7910 Inches Maximum
- Inner Ring Width [AGVU]
- 0.8700 Inches Minimum And 0.8750 Inches Maximum
- Length From Bore Center To Shank End [AGXH]
- 4.5000 Inches Minimum And 4.5310 Inches Maximum
- Lubrication Material Document And Classification [LMDC]
- Mil-G-23827 Mil Spec Single Material Response
- Lubrication Material [ADZG]
- Grease
- Material Document And Classification [MDCL]
- Ams6440,81346 Mfr Ref Single Material Response Alignment Ring
- Material Document And Classification [MDCL]
- Ams6440,81346 Mfr Ref Single Material Response Inner Ring
- Material Document And Classification [MDCL]
- Ams6440,81346 Mfr Ref Single Material Response Outer Ring
- Material Document And Classification [MDCL]
- Ams6440,81346 Mfr Ref Single Material Response Roller
- Self-Alignment Location [AHAW]
- Internal
- Shank Diameter [AAZE]
- 1.1136 Inches Minimum And 1.1250 Inches Maximum
- Shank Style [AAZF]
- Externally Threaded W/Slot
- Shank Thread Length [AGGY]
- 3.0520 Inches Minimum And 3.0720 Inches Maximum
- Overall Length [ABHP]
- 5.5830 Inches Minimum And 5.6340 Inches Maximum
- Overall Outside Diameter [ADGA]
- 2.1660 Inches Minimum And 2.2060 Inches Maximum
- Special Features [FEAT]
- Fitting,Lubrication Thru One Wall
- Style Designator [STYL]
- Needle Roller
- Surface Treatment Document And Classification [STDC]
- Gss8050a,26512 Mfr Ref Single Treatment Response Rod End Body
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type 1,Class 2 Fed Spec Single Treatment Response Alignment Ring
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type 1,Class 2 Fed Spec Single Treatment Response Inner Ring
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type 1,Class 2 Fed Spec Single Treatment Response Outer Ring
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type 1,Class 2 Fed Spec Single Treatment Response Roller
- Surface Treatment [SFTT]
- Cadmium Alignment Ring
- Surface Treatment [SFTT]
- Cadmium Inner Ring
- Surface Treatment [SFTT]
- Cadmium Outer Ring
- Surface Treatment [SFTT]
- Cadmium Rod End Body
- Surface Treatment [SFTT]
- Cadmium Roller
- Test Data Document [TEST]
- 81349-Mil-I-6868 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Series Designator [THSD]
- Unf
- Thread Quantity Per Inch [CMLP]
- 12
DLA Procurement Analysis 3110-00-796-2720
Management Data 3110-00-796-2720
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 3110-00-796-2720
Freight Information 3110-00-796-2720
3110-00-796-2720 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-00-796-2720 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-00-796-2720 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-00-796-2720 is not classified as a special type of cargo when transported by water. 3110-00-796-2720 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3110-00-796-2720
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 9.7" H x 5.0" W x 5.0" L
- --
- --
- --
- --
- 9.7" H x 5.0" W x 5.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 3110-00-796-2720 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: