Premium Information is available for this item - Upgrade for $1 a day
3110-00-630-0752
Annular Ball Bearing
3110006300752 006300752 SS77R4XR3CW9 SS77R4XR3CW 191002
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME. View more Annular Ball Bearing
May 2023
9
Marketplace 3110-00-630-0752
Request a Quotation from participating marketplace vendors
Related Documents 3110-00-630-0752 5+ Documents (More...)
Day SS77R4XR3CW RQST NE Updated Every Day 3110-00-630-0752 RQST NE Updated Every Day 3110-00-630-0752
RQST Updated Every Day 3110-00-630-0752 RQST NE Related Documents 3110-00-630-0752 5+ Documents ( More
VT3612-16UU-191002 REVISION NC A multi-ported, nonlubricated valve designed to provide straight through
VT3612-16UU-191002 A repair kit consisting NOTE 17 RK-16UU-191002 VT3612-16UU-191002 A repair kit consisting
VT3612-04UU-191002 A repair kit consisting of parts and tool(s) used to repair a VALVE (as modified)
48/fsc-4820/us 4820-01-694-3112 Valve Repair Kit 4820016943112016943112 RK-04UU-191002VT3612-04UU-191002
VT3612-04UU-191002 REV NC A multi-ported, nonlubricated valve designed to provide straight through flow
VT3612-04UU-191002 4820016943112016943112 RK-04UU-191002VT3612-04UU-191002 https//www.nsnlookup.com
NOTE 17 RK-16UU-191002 VT3612-16UU-191002 A repair kit consisting of parts and tool(s) used to repair
NOTE 17RK-16UU-191002VT3612-16UU-191002 A repair kit https//www.nsnlookup.com /fsg-31/fsc-3110/us 3110
Restrictions 3110-00-630-0752
3110-00-630-0752 is a Annular Ball Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3110-00-630-0752
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-00-630-0752
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
Approved Sources 3110-00-630-0752
- Part Number
- Manufacturer
- Status
- SS77R4XR3CW9
- Manufacturer
- 7X677 - General Motors Llc (Active)
- Primary Buy
- Primary Buy
- SS77R4XR3CW
- 7X677 - General Motors Llc (Active)
- Secondary Buy
- Secondary Buy
- 191002
- 37695 - Raytheon Company (Active)
- Secondary Buy
- Secondary Buy
- SS77R4XR3CW
- 24617 - General Motors Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- SS77R4XR3CW9
- 24617 - General Motors Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- SS77R4XR3CW
- 43334 - General Motors Corp Delco Moraine (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- SS77R4XR3CW9
- 43334 - General Motors Corp Delco Moraine (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3110-00-630-0752
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Material [MATT]
- Steel Corrosion Resisting Overall
- Style Designator [STYL]
- Non-Loading Groove, Non-Separable
- Overall Width [ABMK]
- 0.1960 Inches Nominal
- Bore Diameter [ABXV]
- 0.2500 Inches Nominal
- Overall Outside Diameter [ADGA]
- 0.6250 Inches Nominal
- Lubrication Material [ADZG]
- Oil
- Lubrication Material Document And Classification [LMDC]
- Mil-L-19701 Mil Spec Single Material Response
- Standard Tolerance Designation [CTFZ]
- Abec No.3
- Bore Shape [AGZD]
- Straight
- Surface Finish [AGYE]
- Ground
- Retainer Fabrication Method [AGYF]
- Pressed
- Shield Quantity [AGYK]
- 2
- Load Direction [AGZC]
- Radial
- Internal Fit-Up Designation [AGZH]
- Standard
DLA Procurement Analysis 3110-00-630-0752
Management Data 3110-00-630-0752
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 3110-00-630-0752
Freight Information 3110-00-630-0752
3110-00-630-0752 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-00-630-0752 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-00-630-0752 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-00-630-0752 is not classified as a special type of cargo when transported by water. 3110-00-630-0752 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3110-00-630-0752 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: