Premium Information is available for this item - Upgrade for $1 a day
3110-00-415-3065
Annular Ball Bearing
3110004153065 004153065 PWA21350-39
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME. View more Annular Ball Bearing
January 2023
5
Marketplace 3110-00-415-3065
Request a Quotation from participating marketplace vendors
Related Documents 3110-00-415-3065 3+ Documents (More...)
Annular Ball Bearing 3110004153065 004153065 3110-00-415-3065 3110004153065 004153065 is a cylindrical
Restrictions 3110-00-415-3065
IUID Required
3110-00-415-3065 is a Annular Ball Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3110-00-415-3065
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-00-415-3065
- US Air Force (FXX4)
- Effective Date:
- 1 Apr 1991
Approved Sources 3110-00-415-3065
- Part Number
- Manufacturer
- Status
- PWA21350-39
- Manufacturer
- 57342 - Rae Bearing Service Inc (Active)
- Primary Buy
- Primary Buy
- PWA21350-39
- 77445 - Rtx Corporation (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3110-00-415-3065
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Bearing Preload Rating [CTHQ]
- 34.0 Pounds Nominal
- Bore Diameter [ABXV]
- 4.1237 Inches Minimum And 4.1239 Inches Maximum
- Bore Shape [AGZD]
- Straight
- Internal Clearance [AKVV]
- 0.0014 Inches Minimum Radial And 0.0019 Inches Maximum Radial
- Load Direction [AGZC]
- Radial
- Retainer Fabrication Method [AGYF]
- Pressed
- Overall Outside Diameter [ADGA]
- 6.5000 Inches Nominal
- Overall Width [ABMK]
- 0.8750 Inches Nominal
- Standard Tolerance Designation [CTFZ]
- Abec No.7
- Style Designator [STYL]
- Non-Loading Groove, Non-Separable
- Surface Finish [AGYE]
- Ground
Management Data 3110-00-415-3065
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Mar 2006
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Air Force
- Budget:
- Y
- Centrally procured equipment items. They are separate, primary end items (other than the weapon system itself) needed by a user to perform an assigned mission. They are non-expendable items (ERRC NF or ND) which are not consumed in use, and they do not lose their original identity during periods of use by incorporation into, or attachment to another assembly
- Aggregation Code:
- PQ
- PRATT & WHITNEY ENGINES AND COMPONENTS, TF-30
- Price Validation Code:
- X
- The current standard price has been validated and the previous price was erroneous.
The item was overpriced and the contractor has refunded the overcharge or DoD activities did not actually pay the previous price. The price paid is within the analyzed acceptable range.
If the difference from the previous price exceeds $99.99 or if the price change exceeds 500 percent and the extended value of any affected transaction exceeds $99.99, then reverse-post procedures will apply where the stock fund has overcharged unit O&M Funds. These corrections will be limited to the current fiscal year.
ZOP or Standard Price challenges are permissible but should be supported by adequate justification.
- Expendability
Recoverability
Repairability: - U
- Reparable. Condemn at Intermediate. AF Equipment Management System (AFEMS).
NATO Stock Numbers Related to 3110-00-415-3065
Freight Information 3110-00-415-3065
3110-00-415-3065 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-00-415-3065 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-00-415-3065 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 671 for ocean manifesting and military sealift. 3110-00-415-3065 is not classified as a special type of cargo when transported by water. 3110-00-415-3065 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3110-00-415-3065
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 7.3" H x 7.3" W x 2.5" L
- --
- --
- --
- --
- 7.3" H x 7.3" W x 2.5" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-11796, Class 3, Light Preservative Compound, Soft Film, Hot Application
- --
- PPP-C-795, Class 1, Cellular Plastic Film Cushioning
- --
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --