Premium Information is available for this item - Upgrade for $1 a day
3110-00-108-3812
Annular Ball Bearing
3110001083812 001083812 1-1013 G1107KLLB
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME. View more Annular Ball Bearing
Managed by United States
NSN Created on 1 Jan 1963
Data Last Changed
August 2023
August 2023
NATO Update Count
12
12
NATO Data Quality
Marketplace 3110-00-108-3812
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 3110-00-108-3812 5+ Documents (More...)
5355-99-528-4465 5355995284465 995284465 is an item designed to transmit manual, rotary or linear motion to other devices. may include detachable or nondetachable stud (shaft), pointer, or skirt. it may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. for items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see handwheel. for items calibrated in units or series of divisions to denote relative positioning of devices see dial, control. excludes doorknob; and handle (as modified).
5930-99-646-3858 5930996463858 996463858 is a switch that is externally actuated by a device such as a push rod or button, which requires pushing for each actuation. the action may be momentary, with mechanical return. the actuating device may or may not be an integral part of the switch. the item may include provisions for mounting indicating lamp(s) or light emitting diode(s) in the actuator. includes items consisting of individually separable switches that are physically interlocked, that have a common actuator, or are electrically connected. excludes light-switch; light-switch assembly; switch, beam selecting, headlight; switch, foot; switch, interlock; switch, pressure; switch, push-pull; switch, sensitive and switch assembly. for devices which start, stop, reverse, select and/or regulate the speed of a motor, see starter, motor and controller, motor.
Address:1-1013, 187 Techno 2-Ro, Yuseong-Gu, Daejeon Daejeon 34025 Korea, Republic Of Points of Contact
identifier used by NATO Organizations to reference the physical entity known as Fagkbc located at 1-1013
547LF refers to Fagkbc located at 1-1013, 187 Techno 2-Ro, Yuseong-Gu,, Daejeon, Daejeon, 34025, Korea
identifier used by NATO Organizations to reference the physical entity known as Fagkbc located at 1-1013
547LF refers to Fagkbc located at 1-1013, 187 Techno 2-Ro, Yuseong-Gu,, Daejeon, Daejeon, 34025, Korea
https//www.nsnlookup.com
/fsg-84/fsc-8455/us
/fsg-84/fsc-8455/us
8455-01-693-1418 Shoulder Sleeve Insignia 8455016931418
Account Upgrade 8455-01-693-1418Shoulder Sleeve Insignia8455016931418 016931418 MIL-DTL-14652B A-1-1013
Account Upgrade 8455-01-665-0104Shoulder Sleeve Insignia8455016650104 016650104 MIL-DTL-14652B A-1-1013
An insignia to be affixed on the upper extremity of the sleeve to indicate an organization A-1-1013
Account Upgrade 8455-01-665-0104Shoulder Sleeve Insignia8455016650104 016650104 MIL-DTL-14652B A-1-1013
An insignia to be affixed on the upper extremity of the sleeve to indicate an organization A-1-1013
https//www.nsnlookup.com
/fsg-84/fsc-8455/us
/fsg-84/fsc-8455/us
8455-01-665-0104 Shoulder Sleeve Insignia 8455016650104
Account Upgrade 8455-01-665-0104Shoulder Sleeve Insignia8455016650104 016650104 MIL-DTL-14652B A-1-1013
Account Upgrade 8455-01-581-9769Shoulder Sleeve Insignia8455015819769 015819769 MIL-DTL-14652B A-1-1013
Account Upgrade 8455-01-581-9810Shoulder Sleeve Insignia8455015819810 015819810 MIL-DTL-14652B A-1-1013
Account Upgrade 8455-01-581-9769Shoulder Sleeve Insignia8455015819769 015819769 MIL-DTL-14652B A-1-1013
Account Upgrade 8455-01-581-9810Shoulder Sleeve Insignia8455015819810 015819810 MIL-DTL-14652B A-1-1013
Restrictions 3110-00-108-3812
3110-00-108-3812 is a Annular Ball Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3110-00-108-3812
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-00-108-3812
- US Army (A919)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- A180
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- US Navy (N9BG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GT
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3110-00-108-3812
- Part Number
- Manufacturer
- Status
- 1-1013
- Manufacturer
- 31245 - Terex Usa Llc (Active)
- Primary Buy
- Primary Buy
- G1107KLLB
- 21335 - Timken Co (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3110-00-108-3812
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Alignment Type [AGZA]
- Self-Aligning
- Bearing Seal Type [AGYW]
- Labyrinth
- Bore Diameter [ABXV]
- 1.4375 Inches Minimum And 1.4380 Inches Maximum
- Bore Shape [AGZD]
- Straight
- Material [MATT]
- Steel Ball
- Material [MATT]
- Steel Inner Ring
- Material [MATT]
- Steel Outer Ring
- Material [MATT]
- Steel Seal
- Outer Ring Width [AGVT]
- 19.0 Millimeters Nominal
- Internal Fit-Up Designation [AGZH]
- Standard
- Load Direction [AGZC]
- Radial
- Lubrication Material Document And Classification [LMDC]
- Dod-G-24508 Mil Spec Single Material Response
- Lubrication Material [ADZG]
- Grease
- Seal Quantity [AGYJ]
- 2
- Self-Alignment Location [AHAW]
- External
- Overall Outside Diameter [ADGA]
- 2.8341 Inches Minimum And 2.8346 Inches Maximum
- Overall Width [ABMK]
- 1.4790 Inches Minimum And 1.4840 Inches Maximum
- Special Features [FEAT]
- Lubrication Hole In Outer Ring
- Style Designator [STYL]
- Single Row Ball, External Self-Aligning, Inner Ring Extended Both Sides, With Eccentric Locking Collar
- Surface Finish [AGYE]
- Ground
DLA Procurement Analysis 3110-00-108-3812
Management Data 3110-00-108-3812
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3110-00-108-3812
3110-27-045-3706 3110-15-070-0701 3110-22-618-3610 3110-33-154-0805 3110-34-031-3489 3110-21-878-4043 3110-14-399-3621 3110-19-004-0780 3110-12-169-0120 3110-66-077-7949 3110-12-327-7655 3110-14-369-1301 3110-27-051-6446 3110-17-111-1344 3110-66-077-6577 3110-12-193-4432 3110-27-058-5009 3110-14-519-4012
Freight Information 3110-00-108-3812
3110-00-108-3812 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-00-108-3812 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-00-108-3812 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-00-108-3812 is not classified as a special type of cargo when transported by water. 3110-00-108-3812 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3110-00-108-3812
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 3110-00-108-3812 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: