3110-14-378-9513

for $1 a day Upgrade your Account Upgrade 8465-01-541-3386Hydration System8465015413386 015413386 60363
the Cage Code 60363 and is tracked by Dun & Bradstreet under DUNS Number 045492790.
What is CAGE Code 60363?

) Spartanburg 6. 60363 Parker-Hannifin Corporation, Div O-Ring Division is an Active Manufacturer with
the Cage Code 60363 and is tracked by Dun & Bradstreet under DUNS Number 045492790.
What is CAGE Code 60363?

Spartanburg 6. 60363 Parker-Hannifin Corporation, Div O-Ring Division is an Active Manufacturer with
the Cage Code 60363 and is tracked by Dun & Bradstreet under DUNS Number 045492790.
What is CAGE Code 60363?

ComponentsFederal Supply Group: FSG 59 NATO Supply Classification Group: NSG 59Item Hits: 31 | INC 60363
INC 60363 Protective Cutout Disk Additional Information for Protective Cutout Disk Protective cutout
Related Item Names for INC 60363 Protective Cutout Disk Cartridge Fuse Enclosed Link Fuse Indicator Alarm

5365-99-611-8807 5365996118807 996118807 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.