Premium Information is available for this item - Upgrade for $1 a day
3040-01-656-6474
Shouldered Shaft
3040016566474 016566474 J622 J20009-99
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
1
Marketplace 3040-01-656-6474
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-656-6474 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-656-6474 RQST NE Updated Every Day 3040-01-656-6474 RQST
Updated Every Day 3040-01-656-6474 RQST NE Related Documents 3040-01-656-6474 5+ Documents ( More...
12C6BXSS ELBOW,TUBE 137 EA NS Request Quotation 3903-12-12SS ELBOW,TUBE 55 EA NS Request Quotation J622
ELBOW,TUBE 96 EA NS Request Quotation MIL-F-18866 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-656-6474
MS51521B10S ELBOW,TUBE 66 EA NS Request Quotation MS51521A10S ELBOW,TUBE 93 EA NS Request Quotation J622
MS51521B10S ELBOW,TUBE 66 EA NS Request Quotation MS51521A10S ELBOW ,TUBE 93 EA NS Request Quotation J622
MS51521A16S ELBOW,TUBE 52 EA NS Request Quotation MS51521 ELBOW,TUBE 71 EA NS Request Quotation J622-
an MS51521A16S ELBOW,TUBE 52 EA NS Request Quotation MS51521 ELBOW,TUBE 71 EA NS Request Quotation J622
18866 NIPPLE MIL-F-18866 https//www.nsnlookup.com https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-656-6474
Shouldered Shaft 3040016566474 016566474,J622 008878090 a day Upgrade your Account Upgrade 4730
Restrictions 3040-01-656-6474
3040-01-656-6474 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-656-6474
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-656-6474
- US Air Force (FBB5)
- Effective Date:
- 1 Jul 2016
Approved Sources 3040-01-656-6474
- Part Number
- Manufacturer
- Status
- J622
- Manufacturer
- 070J7 - Shepherd Caster Corporation (Active)
- Primary Buy
- Primary Buy
- J20009-99
- 81205 - The Boeing Company (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-656-6474
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Kc-46A Se
- Material [MATT]
- Steel Corrosion Resisting
- Part Name Assigned By Controlling Agency [CXCY]
- Shaft,Shouldered
- Overall Length [ABHP]
- 30.000 Inches Nominal
DLA Procurement Analysis 3040-01-656-6474
Management Data 3040-01-656-6474
Air Force
- Budget:
- S
- 57X3010 - Aircraft Replenishment Spares
- Aggregation Code:
- TK
- KC-46 TANKER
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3040-01-656-6474
Freight Information 3040-01-656-6474
3040-01-656-6474 has freight characteristics.. 3040-01-656-6474 has a variance between NMFC and UFC when transported by rail and the description should be consulted.