Premium Information is available for this item - Upgrade for $1 a day
3040-01-646-8121
Straight Axle
3040016468121 016468121 12446469
A straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Axle
June 2023
1
Marketplace 3040-01-646-8121
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-646-8121 1+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-646-8121 RQST NE Updated Every Day 3040-01-646-8121 RQST
Updated Every Day 3040-01-646-8121 RQST NE Related Documents 3040-01-646-8121 1+ Documents ( More...
Restrictions 3040-01-646-8121
3040-01-646-8121 is a Straight Axle that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 3040-01-646-8121
- US Army (A920)
- Effective Date:
- 1 Jul 2015
- Supplementary Receivers:
- AZ
Approved Sources 3040-01-646-8121
- Part Number
- Manufacturer
- Status
- 12446469
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-646-8121
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 1.375 Inches Nominal
- First End Internal Thread Length [AMER]
- 0.380 Inches Nominal
- First End Style [AAGZ]
- Flat Grooved And Internally Threaded
- End Item Identification [AGAV]
- 2520-01-626=5061
- Material Document And Classification [MDCL]
- Astm A600 Assn Std Single Material Response
- Material [MATT]
- Steel
- Part Name Assigned By Controlling Agency [CXCY]
- Shaft,Straight
- Second End Hole Diameter [AMGS]
- 0.079 Inches Nominal
- Second End Diameter [AMFZ]
- 1.375 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.190 Inches Nominal
- Second End Style [AAHP]
- Unthreaded Cross Drilled
- Overall Length [ABHP]
- 2.120 Inches Nominal
Weapon Systems (WSDC) 3040-01-646-8121
DLA Procurement Analysis 3040-01-646-8121
Management Data 3040-01-646-8121
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 3040-01-646-8121
Freight Information 3040-01-646-8121
3040-01-646-8121 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 132330. A Sub NMFC of X. It has a NMFC Description of TRANSMISSIONS/CLUTCHES/PARTS,NOI. 3040-01-646-8121 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64340 which rates the freight between FCL and LCL. 3040-01-646-8121 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-646-8121 is not classified as a special type of cargo when transported by water. 3040-01-646-8121 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 3040-01-646-8121 1 Records
Contracting Technical Data File (CTDF) 3040-01-646-8121 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Y
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: