Premium Information is available for this item - Upgrade for $1 a day
3040-01-641-0034
Shouldered Shaft
3040016410034 016410034 845-7526489 ITEM NO. 8 845-7526489-2A-05-A-3-N-D-008 845-7526489
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-641-0034
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-641-0034 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-641-0034 RQST NE Updated Every Day 3040-01-641-0034 RQST
/fsg-30/fsc-3040/us 3040-01-641-0034 Shouldered Shaft 3040016410034016410034 ITEM NO. 8 845-7526489
/fsg-30/fsc-3040/us
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-641-0034 Shouldered Shaft 3040016410034 016410034
for $1 a day Upgrade your Account Upgrade 3040-01-641-0034Shouldered Shaft3040016410034 016410034 845
016925879845 -009 845-7526489-2A-05-A-3-N-D N7526489103B02NXXA 845-7526489 A hand controlled device
Shouldered Shaft 3040016410034 016410034 ITEM NO. 8 845-7526489-2A-05-A-3-N-D-008 845-7526489 A
845-7526489 A shaft having two or https https//www.nsnlookup.com /fsg-48/fsc-4820/us 4820-01-692-5822
-XX-08-X-X-X-X-008 845 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-641-0034 Shouldered Shaft
Managed by United States NSN Created on ITEM NO. 7 845-7526489-2A-05-A -3-N-D-007 845-7526489 A shaft
-3040/us 3040-01-641-0034 Shouldered Shaft 3040016410034 016410034 ITEM NO. 8 845-7526489-2A-05-A-3-N-D
Restrictions 3040-01-641-0034
3040-01-641-0034 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-641-0034
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-641-0034
- US Navy (N9BC)
- Effective Date:
- 1 Jan 2015
- Supplementary Collaborators:
- HX
Approved Sources 3040-01-641-0034
- Part Number
- Manufacturer
- Status
- 845-7526489-2A-05-A-3-N-D-008
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 845-7526489 ITEM NO. 8
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 845-7526489
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-641-0034
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel Comp 4140
- Largest Step Diameter [CSPY]
- 1.300 Inches Nominal
- Overall Length [ABHP]
- 8.430 Inches Nominal
- Step Quantity [ATPC]
- 6
DLA Procurement Analysis 3040-01-641-0034
Management Data 3040-01-641-0034
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-641-0034
Freight Information 3040-01-641-0034
3040-01-641-0034 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-641-0034 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-641-0034 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-641-0034 is not classified as a special type of cargo when transported by water. 3040-01-641-0034 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-641-0034 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: