Premium Information is available for this item - Upgrade for $1 a day
3040-01-626-5740
Shouldered Shaft
3040016265740 016265740 16172
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-626-5740
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-626-5740 5+ Documents (More...)
Updated Every Day 3040-01-626-5740 RQST NE Related Documents 3040-01-626-5740 5+ Documents ( More...
Every Day 3040-01-626-5740 RQST NE Related Documents 3040-01-626-5740 5+ Documents ( More... https//
www.nsnlookup.com /fsg-53/fsc-5340/fr 5340-14-397-7874 Entretoise 5340143977874 143977874,2-16172 2-
16172 21681273216172PT2ANDA377PT2AD-0053B2-16172 www.nsnlookup.com /fsg-48/fsc-4820/ca 4820-21-681-1642
16172 D-0053B 2-16172 www.nsnlookup.com /fsg-48/fsc-4820/ca 4820-21-681-1642 Special Shaped Valve Diaphragm
Shouldered Shaft 3040016265740 016265740 Diaphragm 4820216812732 4820-21-681-2732Special Shaped
66/fsc-6640/us 6640-01-394-4935 6625-01-560-7281 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-626-5740
Shouldered Shaft 3040016265740 016265740 Diaphragm 4820216812732 4820-21-681-2732Special Shaped
ITEM NO.14 16172 A device with means other than fuses for automatically opening the circuit in which
(Replaced) Original Design RNCC 3 RNVC 9 DAC D 16172 ITEM NO.14 0SMN2 - Itw Gse Inc.
Restrictions 3040-01-626-5740
3040-01-626-5740 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-626-5740
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-626-5740
- US Air Force (FGGC)
- Effective Date:
- 1 Mar 2014
Approved Sources 3040-01-626-5740
- Part Number
- Manufacturer
- Status
- 16172
- Manufacturer
- 06177 - Pneudraulics, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-626-5740
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Various C5
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.245 Inches Minimum And 0.255 Inches Maximum
- First End Bearing Seat Diameter [AMEL]
- 0.450 Inches Minimum And 0.460 Inches Maximum
- First End Bearing Seat Length [AMEJ]
- 0.060 Inches Nominal
- First End Distance From Bearing Seat To End [AMEP]
- 0.020 Inches Nominal
- First End Style [AAGZ]
- Bearing Seat
- Material Document And Classification [MDCL]
- Qq-S-763, Condition H Fed Spec Single Material Response
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 0.450 Inches Minimum And 0.460 Inches Maximum
- Second End Diameter [AMFZ]
- 0.24 Inches Minimum And 0.26 Inches Maximum
- Second End Style [AAHP]
- Plain
- Overall Length [ABHP]
- 0.155 Inches Minimum And 0.165 Inches Maximum
- Part Name Assigned By Controlling Agency [CXCY]
- Spring Guide
- Special Features [FEAT]
- Shaft Has A 0.030 Inch Diameter Thru Hole. Shaft Is Passivated Per Mil-S-5002.
- Step Quantity [ATPC]
- 1
- Surface Finish [CSYM]
- 125.0 Microinches
DLA Procurement Analysis 3040-01-626-5740
Management Data 3040-01-626-5740
Similar Supply Items to 3040-01-626-5740
Freight Information 3040-01-626-5740
3040-01-626-5740 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-626-5740 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-626-5740 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-626-5740 is not classified as a special type of cargo when transported by water. 3040-01-626-5740 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-626-5740 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: