Premium Information is available for this item - Upgrade for $1 a day
3040-01-616-1711
Friction Lining Material
3040016161711 016161711 3J-266706
A fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion. View more Friction Lining Material
August 2023
1
Marketplace 3040-01-616-1711
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-616-1711 1+ Documents (More...)
/fsg-30/fsc-3040/us
Updated Every Day 3040-01-616-1711 RQST NE Related Documents 3040-01-616-1711 1+ Documents ( More...
) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-616-1711 Friction Lining Material 3040016161711
Restrictions 3040-01-616-1711
3040-01-616-1711 is a Friction Lining Material that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 3040-01-616-1711
- US Army (A920)
- Effective Date:
- 1 Feb 2013
- Supplementary Receivers:
- AZ
- US Marine Corps (MC40)
- Effective Date:
- 1 Jun 2013
Approved Sources 3040-01-616-1711
- Part Number
- Manufacturer
- Status
- 3J-266706
- Manufacturer
- 1QNQ0 - Lift Technologies, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-616-1711
- Characteristic
- Specifications
- FIIG
- Specifications
- A230A0
- End Item Identification [AGAV]
- 3930-01-599-9978
- Application Type [AJMJ]
- Dry
- Fabrication Method [AARN]
- Molded
- Minor Diameter [AGJR]
- 53.0 Millimeters Nominal
- Friction Lining Material [AJKJ]
- Plastic, Polyamide Nylon
- Lining Style [AJKK]
- Clutch Disk
- Major Diameter [AAZR]
- 100.0 Millimeters Nominal
- Part Name Assigned By Controlling Agency [CXCY]
- Wear Pad,Tilt-Carriage Slide Frame
- Strengthening Feature [ADZK]
- Internally Molded-In Reinforcement
- Surface Condition And Location [CQHT]
- Both Sides Ground
- Thickness [ABNM]
- 0.250 Inches Nominal
Weapon Systems (WSDC) 3040-01-616-1711
DLA Procurement Analysis 3040-01-616-1711
Management Data 3040-01-616-1711
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 3040-01-616-1711
Freight Information 3040-01-616-1711
3040-01-616-1711 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 014640. A Sub NMFC of X. It has a NMFC Description of BRAKE BLOCKS / BRAKE LININGS. 3040-01-616-1711 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 06410 which rates the freight between FCL and LCL. 3040-01-616-1711 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 586 for ocean manifesting and military sealift. 3040-01-616-1711 is not classified as a special type of cargo when transported by water. 3040-01-616-1711 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 3040-01-616-1711 3 Records
Contracting Technical Data File (CTDF) 3040-01-616-1711 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Y
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: