Premium Information is available for this item - Upgrade for $1 a day
3040-01-578-0367
Manual Control Lever
3040015780367 015780367 19-0204-12 12239
A rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK. View more Manual Control Lever
November 2023
1
Marketplace 3040-01-578-0367
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-578-0367 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-578-0367 RQST NE Updated Every Day 3040-01-578-0367 RQST
RQST NE Updated Every Day 3040-01-578-0367 RQST Updated Every Day 3040-01-578-0367 RQST NE Related
0-12239 Managed by Italy NSN Created on 29 Jun 1979 Data RQST NE Updated Every Day 4710-15-007-0849
Manual Control Lever 3040015780367 015780367 RQST NE Updated Every Day 3040-01-578-0367 RQST https
a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 900-12239
122390-12239 Managed by Italy NSN Created on 29 Jun https//www.nsnlookup.com /fsg-66/fsc-6625/us 6625
-012071-12239-01-0-T A grouping of two or more physically connected or related -01 2071-12239 https//
-012071-12239-01-0-T A grouping of two or 2071-122392071-12239-012071-12239-01-0-T A grouping of two
122392071-12239 -012071-12239-01-0-T A grouping of two or 2071-122392071-12239-012071-12239-01-0-T A
-01-0-T A grouping of two or more physically 2071-12239-01 2071-12239-01-0-T A grouping Hexagon Plain
Restrictions 3040-01-578-0367
3040-01-578-0367 is a Manual Control Lever that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-578-0367
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-578-0367
- US Air Force (FGGC)
- Effective Date:
- 1 Sep 2009
Approved Sources 3040-01-578-0367
- Part Number
- Manufacturer
- Status
- 19-0204-12
- Manufacturer
- 04710 - Wescon Products Company (Active)
- Primary Buy
- Primary Buy
- 12239
- 0SUA9 - Generac Mobile Products, Llc (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-578-0367
- Characteristic
- Specifications
- FIIG
- Specifications
- A524V0
- End Item Identification [AGAV]
- Support Equipment
- Special Features [FEAT]
- Standard Handle,Without Orange Knob Cover,Without Hardware Kit.
- Part Name Assigned By Controlling Agency [CXCY]
- Brake Handle
Weapon Systems (WSDC) 3040-01-578-0367
DLA Procurement Analysis 3040-01-578-0367
- Last Stock Position:
- 13 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-578-0367
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3040-01-578-0367
Freight Information 3040-01-578-0367
3040-01-578-0367 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 133300. A Sub NMFC of Z. It has a NMFC Description of MACHINERY/MACHINES NOI. 3040-01-578-0367 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 63220 which rates the freight between FCL and LCL. 3040-01-578-0367 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-578-0367 is not classified as a special type of cargo when transported by water. 3040-01-578-0367 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-578-0367
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- Vendor's Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 3040-01-578-0367 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE7L314V9625
- 03 Sep 2014
- Subscribe
- 16
- Subscribe
- Subscribe
- Subscribe
- SPE7L314M8774
- 19 Aug 2014
- Subscribe
- 4
- Subscribe
- Subscribe
- Subscribe
- SPE7L314V6816
- 10 Jun 2014
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPE7L014M2293
- 08 May 2014
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPM7L013M4272
- 28 Mar 2013
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 3040-01-578-0367 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: