Premium Information is available for this item - Upgrade for $1 a day
3040-01-565-5298
Shouldered Shaft
3040015655298 015655298 278-8747
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-565-5298
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-565-5298 5+ Documents (More...)
Updated Every Day 3040-01-565-5298 RQST NE Related Documents 3040-01-565-5298 5+ Documents ( More...
Every Day 3040-01-565-5298 RQST NE Related Documents 3040-01-565-5298 5+ Documents ( More...
RQST NE Related Documents 4720-00-278-8747 3+ Documents ( More RQST Updated Every Day 4720-00-278-8747
4720-00-278-8747 Marketplace Restrictions Approved https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040
/fsg-62/fsc-6220/fr 6220-14-278-8747 Day 6220-14-278-8747 RQST NE Related Documents 6220-14-278-8747
/fsg-62/fsc-6220/fr 6220-14-278-8747 Light Reflector 6220142788747142788747 Every Day 6220-14-278-8747
RQST Updated Every Day 2990-01-278-8747 RQST NE Related Documents 2990-01-278-8747 2+ Documents ( More
RQST Updated Every Day 2990-01-278-8747 RQST NE Related Documents 2990-01-278-8747 2+ Documents 012788747
99-344-9106 Transformer 5950993449106 https https//www.nsnlookup.com /fsg-47/fsc-4720/us 4720-00-278-8747
4720002788747 002788747 4720-00-278-8747 RQST NE Restrictions 4720-00- https//www.nsnlookup.com /fsg
Restrictions 3040-01-565-5298
3040-01-565-5298 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-565-5298
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-565-5298
- US Marine Corps (MC40)
- Effective Date:
- 1 Jul 2008
Approved Sources 3040-01-565-5298
- Part Number
- Manufacturer
- Status
- 278-8747
- Manufacturer
- 11083 - Caterpillar Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-565-5298
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- 3805-01-550-0883;Multi Terrain Loader
- Part Name Assigned By Controlling Agency [CXCY]
- Shaft,Drive
DLA Procurement Analysis 3040-01-565-5298
Management Data 3040-01-565-5298
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
Similar Supply Items to 3040-01-565-5298
Freight Information 3040-01-565-5298
3040-01-565-5298 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-565-5298 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-565-5298 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-565-5298 is not classified as a special type of cargo when transported by water. 3040-01-565-5298 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-565-5298
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Waterproof Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- Any bag or sack used by the vendor
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-565-5298 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: