Premium Information is available for this item - Upgrade for $1 a day
3040-01-534-9752
Shouldered Shaft
3040015349752 015349752 204-7519
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
1
Marketplace 3040-01-534-9752
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-534-9752 5+ Documents (More...)
/fsc-5340/es 5340-33-204-7519 //www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-534-9752 Shouldered https
-30/fsc-3040/us 3040-01-534-9752 Shouldered Shaft 3040015349752015349752 -204-7519 4930992047519992047519
Shaft https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-534-9752 Shouldered Shaft 3040015349752 015349752
-204-7519 4930992047519992047519 DEMIL https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-534-9752
TG.42/2/R RQST NE Updated Every Day 8410-15-204-7519 RQST Updated Every Day 8410-15-204-7519 RQST NE
Shouldered Shaft 3040015349752 015349752 www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-534-9752
/fsg-53/fsc-5340/es
RQST NE Updated Every Day 5340-33-204-7519 RQST Updated Every Day 5340-33-204-7519 RQST NE Related Documents
5340-33-204-7519 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5340/es 5340-33-204-7519
//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-534-9752 Shouldered Shaft 3040015349752 015349752 www.nsnlookup.com
98-204-7519 RQST NE Related Documents 8455-98-204-7519 5+ Documents ( More... ) https Restrictions 8455
Restrictions 3040-01-534-9752
3040-01-534-9752 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-534-9752
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-534-9752
- US Marine Corps (MC40)
- Effective Date:
- 1 Dec 2015
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-534-9752
- Part Number
- Manufacturer
- Status
- 204-7519
- Manufacturer
- 11083 - Caterpillar Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-534-9752
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Generator Set, Ship Service Diesel No. 1 And No. 2
- Part Name Assigned By Controlling Agency [CXCY]
- Shaft-Stub, Pto
Weapon Systems (WSDC) 3040-01-534-9752
DLA Procurement Analysis 3040-01-534-9752
- Last Stock Position:
- 2 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-534-9752
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
Similar Supply Items to 3040-01-534-9752
Freight Information 3040-01-534-9752
3040-01-534-9752 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-534-9752 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-534-9752 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-534-9752 is not classified as a special type of cargo when transported by water. 3040-01-534-9752 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-534-9752
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- --
- --
- --
- ASTM - D5118, Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 3040-01-534-9752 4 Records
Contracting Technical Data File (CTDF) 3040-01-534-9752 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: