Premium Information is available for this item - Upgrade for $1 a day
3040-01-517-7473
Straight Shaft
3040015177473 015177473 465-5098
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
November 2023
5
Marketplace 3040-01-517-7473
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-517-7473 5+ Documents (More...)
/fsg-30/fsc-3040/us
Day 5340-00-465-5098 RQST NE Related Documents 5340-00-465-5098 2+ Documents ( More RQST Updated Every
8145-01-465-5098 RQST NE Updated Every Day 8145-01-465-5098 RQST Updated Every Day 8145-01-465-5098
Request a Quotation from participating marketplace vendors Request Related Documents 5930-99-465-5098
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-517-7473 Straight Shaft 3040015177473 015177473
RQST Updated Every Day 5340-00-465-5098 RQST NE Restrictions 5340-00-465-5098 DEMIL: B | DEMILI : |
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-517-7473 Straight Shaft 3040015177473 015177473
RQST NE Updated Every Day 8145-01-465-5098 RQST Updated Every Day 8145-01-465-5098 RQST NE Related https
8145-01-465-5098 RQST Updated Every Day 8145-01-465-5098 RQST NE Related https //www.nsnlookup.com /
8145014655098 014655098,56676-000 Every Day 8145-01-465-5098 RQST NE Related Documents 8145-01-465-5098
Shaft 3040015177473 015177473 5340004655098 004655098 RQST Updated Every Day 5340-00-465-5098 RQST NE
Restrictions 3040-01-517-7473
3040-01-517-7473 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-517-7473
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-517-7473
- US Marine Corps (MC40)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- MC01
- US Navy (N9BC)
- Effective Date:
- 1 Jan 2006
- Supplementary Collaborators:
- HD
- Poland (WP01)
- Effective Date:
- 1 Nov 2010
Approved Sources 3040-01-517-7473
- Part Number
- Manufacturer
- Status
- 465-5098
- Manufacturer
- 8KP69 - Northrop Grumman Systems Corp (Active)
- Primary Buy
- Primary Buy
- 465-5098
- 1YQE8 - Alliant Techsystems Operations Llc (Active)
- Original Design
- Original Design
- 465-5098
- 0291H - Rosomak S.A (Active)
- Secondary Buy
- Secondary Buy
Weapon Systems (WSDC) 3040-01-517-7473
DLA Procurement Analysis 3040-01-517-7473
- Last Stock Position:
- 5 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-517-7473
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 3040-01-517-7473
Freight Information 3040-01-517-7473
3040-01-517-7473 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-517-7473 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-517-7473 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-517-7473 is not classified as a special type of cargo when transported by water. 3040-01-517-7473 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 3040-01-517-7473 1 Records
Contracting Technical Data File (CTDF) 3040-01-517-7473 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: