Premium Information is available for this item - Upgrade for $1 a day
3040-01-511-3661
Shouldered Shaft
3040015113661 015113661 501-7383597-10 H525-7624-10 7383597
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-511-3661
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-511-3661 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-511-3661 RQST NE Updated Every Day 3040-01-511-3661 RQST
Updated Every Day 3040-01-511-3661 RQST NE Related Documents 3040-01-511-3661 5+ Documents ( More...
-16 H525-7624-16 7383597 A nut, flat on top and bottom having 6 flat sides.
Shouldered Shaft 3040015113661 015113661 $1 a day Upgrade your Account Upgrade 3040-01-511-3661Shouldered
A tubular shaped unthreaded item for Sleeve Bushing 3120015110338015110338 -7 H525-7624-7501-7383597
bottom having 6 flat sides. -36 7383597 A safety device 015149301H525-7624-36501-7383597 -367383597 A
An item made of material having elastic properties. -16 H525-7624-16 7383597 A nut, flat on top and
bottom having 6 flat sides. -36 7383597 A safety device https//www.nsnlookup.com /fsg-30/fsc-3040/us
/fsg-31/fsc-3120/us
-7 H525-7624-7 501-7383597 A tubular shaped unthreaded item with or without a flange at one end designed
-7H525-7624-7501-7383597 A tubular shaped unthreaded item with or without a flange at one United States
Restrictions 3040-01-511-3661
3040-01-511-3661 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-511-3661
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-511-3661
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-511-3661
- Part Number
- Manufacturer
- Status
- 501-7383597-10
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- H525-7624-10
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- 7383597
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-511-3661
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Nickel Alloy 502
- Material Document And Classification [MDCL]
- Qq-N-286 Form 2 Fed Spec All Material Responses
- Surface Finish [CSYM]
- 63.0 Microinches
- First End Style [AAGZ]
- External Threaded
- First End Diameter [AMDL]
- 0.5000 Inches Nominal
- First End External Thread Length [AMEA]
- 0.9200 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- External Threaded
- Second End Diameter [AMFZ]
- 0.7500 Inches Nominal
- Second End External Thread Length [AMHA]
- 1.2420 Inches Nominal
- Largest Step Diameter [CSPY]
- 2.000 Inches Nominal
- Overall Length [ABHP]
- 8.570 Inches Nominal
- Step Quantity [ATPC]
- 12
- End Item Identification [AGAV]
- Virginia Class Submarine; Manual Remote Valve Operator
- Part Name Assigned By Controlling Agency [CXCY]
- Operating Shaft
DLA Procurement Analysis 3040-01-511-3661
Management Data 3040-01-511-3661
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-511-3661
Freight Information 3040-01-511-3661
3040-01-511-3661 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-511-3661 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-511-3661 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-511-3661 is not classified as a special type of cargo when transported by water. 3040-01-511-3661 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-511-3661
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 10.6" H x 4.0" W x 4.0" L
- --
- --
- --
- Any Suitable Process
- 10.6" H x 4.0" W x 4.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Fiber Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-511-3661 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: