Premium Information is available for this item - Upgrade for $1 a day
3040-01-509-6112
Shouldered Shaft
3040015096112 015096112 11447564-002
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
2
Marketplace 3040-01-509-6112
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-509-6112 1+ Documents (More...)
Restrictions 3040-01-509-6112
3040-01-509-6112 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-509-6112
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-509-6112
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- BD
- Germany (ZG01)
- Effective Date:
- 1 Jun 2003
- NATO Maintenance and Supply Agency (ZX01)
- Effective Date:
- 1 Nov 2006
Approved Sources 3040-01-509-6112
- Part Number
- Manufacturer
- Status
- 11447564-002
- Manufacturer
- 18876 - Us Army Aviation And Missile Command (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-509-6112
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 1.3720 Inches Minimum And 1.3730 Inches Maximum
- First End Groove Diameter [AAHH]
- 1.0000 Inches Minimum And 1.0150 Inches Maximum
- First End Groove Width [AAHG]
- 0.1200 Inches Nominal
- First End Hole Diameter [AMDX]
- 0.1400 Inches Minimum And 0.1500 Inches Maximum
- First End Distance From End To Groove [AMCY]
- 2.210 Inches Nominal
- First End Distance From Hole Center To End [AMDZ]
- 0.350 Inches Nominal
- First End External Thread Length [AMEA]
- 2.210 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved, Cross Drilled Hole, And Externally Threaded
- Largest Step Diameter [CSPY]
- 1.498 Inches Minimum And 1.499 Inches Maximum
- Second End Flat Depth [AMFN]
- 0.3780 Inches Minimum And 0.4190 Inches Maximum
- Second End Flat Length [AMFP]
- 0.620 Inches Nominal
- Second End Diameter [AMFZ]
- 1.4980 Inches Minimum And 1.4990 Inches Maximum
- Second End Style [AAHP]
- Flatted And Internally Threaded
- Second End Internal Thread Length [AMHP]
- 2.850 Inches Nominal
- Overall Length [ABHP]
- 5.610 Inches Nominal
- Special Features [FEAT]
- First End Threads Are 1.125-12 Unf, Class 2A; Shaft Has Two Grooves - Second Groove Is 1.130 Inches From First End Groove; Second Groove Diameter Is 1.302 To 1.312 Inches; Two Unthreaded Cross Drilled Holes Located From Step At Second End 0.620 Inch Toward First End Along Length; Cross Drilled Holes Are 0.182 To 0.192 Inch Diameter Positioned 87.0 To 93.0 Degrees Apart Around Circumference; Internal Threads Second End Are 0.127-27 Npt. And Intersect Cross Drilled Holes; Second End Is Flatted Two Sides 1.080 To 1.120 Inches Across Flats
- Step Quantity [ATPC]
- 2
- Surface Finish [CSYM]
- 63.0 Microinches
Weapon Systems (WSDC) 3040-01-509-6112
DLA Procurement Analysis 3040-01-509-6112
- Last Stock Position:
- 8 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-509-6112
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 3040-01-509-6112
Freight Information 3040-01-509-6112
3040-01-509-6112 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-509-6112 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-509-6112 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-509-6112 is not classified as a special type of cargo when transported by water. 3040-01-509-6112 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 3040-01-509-6112 2 Records
Contracting Technical Data File (CTDF) 3040-01-509-6112 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: