Premium Information is available for this item - Upgrade for $1 a day
3040-01-504-0772
Shouldered Shaft
3040015040772 015040772 124-6938645 PART 207 6938645
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-504-0772
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-504-0772 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-504-0772 RQST NE Updated Every Day 3040-01-504-0772 RQST
Updated Every Day 3040-01-504-0772 RQST NE Related Documents 3040-01-504-0772 5+ Documents ( More...
A tubular shaped item with or without flange(s) designed to reduce friction and PART 64 124-6938645
A shaft having two or more different diameters (greater than 0.031 inches (0.79 PART 86 124-6938645
PART 223 124-6938645 A sector shaped metal plate, with a tapered profile, designed to be mounted to
Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 124-6938645
PART 223 124-6938645 A sector shaped metal plate, with a tapered profile, designed to be mounted to
PART 204 124-6938645 A sector shaped metal plate, with a tapered profile, designed to be mounted to
/fsg-31/fsc-3120/us
PART 336 6938645 Managed by United States NSN Created on 16 Jan 2003 Data Last Changed May 2023 NATO
Single Leg Wire Rope Assembly 4010015303295 REV C PART-34630345T51230345T14124 -6938645 An assembly
Restrictions 3040-01-504-0772
3040-01-504-0772 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-504-0772
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-504-0772
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-504-0772
- Part Number
- Manufacturer
- Status
- 124-6938645 PART 207
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 6938645
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-504-0772
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 0.08750 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Circular Grooved Woodruff Keyway And Externally Threaded
- Second End Groove Width [AAHW]
- 0.1875 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.7187 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 1.125 Inches Nominal
- Second End Keyway Width [AMFR]
- 0.2510 Inches Nominal
- Second End External Keyway Length [AMFS]
- 2.405 Inches Nominal
- Second End Distance From Keyway Center To End [AMFW]
- 1.312 Inches Nominal
- Second End Diameter [AMFZ]
- 0.7490 Inches Nominal
- Second End External Thread Length [AMHA]
- 1.125 Inches Nominal
- Largest Step Diameter [CSPY]
- 1.0000 Inches Maximum
- Overall Length [ABHP]
- 10.6875 Inches Nominal
- Step Quantity [ATPC]
- 3
- End Item Identification [AGAV]
- Door, Horizonal Slide(Aircraft Carrier Cvn 76)
DLA Procurement Analysis 3040-01-504-0772
Management Data 3040-01-504-0772
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-504-0772
Freight Information 3040-01-504-0772
3040-01-504-0772 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-504-0772 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-504-0772 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-504-0772 is not classified as a special type of cargo when transported by water. 3040-01-504-0772 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-504-0772
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 13.0" H x -- W x -- L
- --
- --
- --
- Any Suitable Process
- 13.0" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Fiber Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-504-0772 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: