Premium Information is available for this item - Upgrade for $1 a day
3040-01-503-9478
Rigid Connecting Link
3040015039478 015039478 124-6938645 PART 72 124-6938645
An item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified). View more Rigid Connecting Link
May 2023
2
Marketplace 3040-01-503-9478
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-503-9478 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-503-9478 RQST NE Updated Every Day 3040-01-503-9478 RQST
Updated Every Day 3040-01-503-9478 RQST NE Related Documents 3040-01-503-9478 5+ Documents ( More...
/fsg-31/fsc-3120/us
PART 84 124-6938645 A tubular shaped item with or without flange(s) designed to reduce friction and
a day Upgrade your Account Upgrade 3040-01-503-9127Rigid Connecting Link3040015039127 015039127 124-6938645
/fsg-31/fsc-3120/us
PART 211 KJB286916B 124-6938645 A tubular shaped item with or without flange(s) designed to reduce friction
A shaft having two or more different diameters (greater than 0.031 inches (0.79 PART 84 124-6938645
A tubular shaped item with or without flange(s) designed to reduce friction and PART 64 124-6938645
A shaft having two or more different diameters (greater than 0.031 inches (0.79 PART 86 124-6938645
A shaft having two or more different diameters (greater than 0.031 inches (0.79 PART 86 124-6938645
A shaft having two or more different diameters (greater than 0.031 inches (0.79 PART 86 124-6938645
Restrictions 3040-01-503-9478
3040-01-503-9478 is a Rigid Connecting Link that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 3040-01-503-9478
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-503-9478
- Part Number
- Manufacturer
- Status
- 124-6938645 PART 72
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 124-6938645
- 43689 - Huntington Ingalls Inc (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-503-9478
- Characteristic
- Specifications
- FIIG
- Specifications
- A524L0
- Body Construction [AZHL]
- Solid
- Body Thickness [ADPR]
- 2.250 Inches Nominal
- Body Width [ADAT]
- 3.000 Inches Nominal
- End Item Identification [AGAV]
- Weapon Systems: Aircraft Carrier Cvn 76
- Material Document And Classification [MDCL]
- Mil-S-22698 Mil Spec Single Material Response
- Material [MATT]
- Steel Corrosion Resisting
- Overall Length [ABHP]
- 4.000 Inches Nominal
- Special Features [FEAT]
- End Item:Door Horizontal Door
DLA Procurement Analysis 3040-01-503-9478
Management Data 3040-01-503-9478
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-503-9478
Freight Information 3040-01-503-9478
3040-01-503-9478 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095630. A Sub NMFC of X. It has a NMFC Description of LAP/CONNECTING LINKS/RINGS STEEL. 3040-01-503-9478 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50070 which rates the freight between FCL and LCL. 3040-01-503-9478 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 3040-01-503-9478 is not classified as a special type of cargo when transported by water. 3040-01-503-9478 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-503-9478
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 8.0" H x -- W x -- L
- --
- --
- --
- Any Suitable Process
- 8.0" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Fiber Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-503-9478 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: