Premium Information is available for this item - Upgrade for $1 a day
3040-01-503-7465
Shouldered Shaft
3040015037465 015037465 596-7410507-6 596-7410332-5 B434-5410-5 B434-5412-6 7410332 7410507
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-503-7465
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-503-7465 5+ Documents (More...)
/fsg-30/fsc-3040/us 3040-01-503-7465 Shouldered Shaft 3040015037465015037465 596-7410507-6596-7410332
-5412-16 596-7410507 596-7410332 A shaft having two or more different https //www.nsnlookup.com /fsg-
/fsg-30/fsc-3020/us 3020-01-503-1561 Matched Bevel Gear Set 3020015031561 596-7410507 -A3596-7410332
Shaft3040015037465 015037465 596-7410507 -6 596-7410332-5 B434-5410-5 B434-5412-6 74103327410507 A shaft
-7410332-2B434-5412-A274103327410507 A grouping of two or more or any -12 596-7410507 https//www.nsnlookup.com
Shouldered Shaft 3040015037465 015037465 $1 a day Upgrade your Account Upgrade 3040-01-503-7465Shouldered
B434-5410-A1 596-7410332 -59 B434-5410-59 B434-5412-16 596-7410507 596-7410332 A shaft having two or
Shouldered Shaft 3040015037465 015037465 -5 B434-5410-5 B434-5412-6 7410332 7410507 A shaft having
-5 B434-5410-5 B434-5412-6 7410332 7410507 A shaft having two or more different diameters (greater than
Gear Assembly Carrier 3010015033388015033388 -59 B434-5410-59 B434-5412-16 596-7410507 596-7410332 -
Restrictions 3040-01-503-7465
3040-01-503-7465 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a US Munitions List Item and must be mutilated to scrap. This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-503-7465
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-503-7465
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-503-7465
- Part Number
- Manufacturer
- Status
- 596-7410507-6
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 596-7410332-5
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- B434-5410-5
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- B434-5412-6
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- 7410332
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 7410507
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-503-7465
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Nickel Alloy K-500
- Material Document And Classification [MDCL]
- Qq-N-286, Form-2, Cond-Anl; Ah Fin-A Fed Spec Single Material Response
- Surface Finish [CSYM]
- 63.0 Microinches
- First End Style [AAGZ]
- Circular Grooved And Externally Threaded
- First End Groove Width [AAHG]
- 0.1200 Inches Nominal
- First End Groove Diameter [AAHH]
- 1.3600 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 1.100 Inches Nominal
- First End Diameter [AMDL]
- 1.5000 Inches Nominal
- First End External Thread Length [AMEA]
- 1.100 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Circular Grooved And Externally Threaded
- Second End Groove Width [AAHW]
- 0.1200 Inches Nominal
- Second End Groove Diameter [AAHX]
- 1.6100 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 1.350 Inches Nominal
- Second End Diameter [AMFZ]
- 1.7500 Inches Nominal
- Second End External Thread Length [AMHA]
- 1.350 Inches Nominal
- Largest Step Diameter [CSPY]
- 3.500 Inches Nominal
- Overall Length [ABHP]
- 23.250 Inches Nominal
- Step Quantity [ATPC]
- 8
- Special Features [FEAT]
- Next Higher Assembly: External Athwartship Drive Handling System Gearbox Assembly.
- End Item Identification [AGAV]
- Seawolf Class Submarine Ssn 23
- Part Name Assigned By Controlling Agency [CXCY]
- Shaft Gear Center
Weapon Systems (WSDC) 3040-01-503-7465
DLA Procurement Analysis 3040-01-503-7465
Management Data 3040-01-503-7465
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-503-7465
Freight Information 3040-01-503-7465
3040-01-503-7465 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-503-7465 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-503-7465 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-503-7465 is not classified as a special type of cargo when transported by water. 3040-01-503-7465 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-503-7465
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Fiber Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-503-7465 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: