Premium Information is available for this item - Upgrade for $1 a day
3040-01-503-7426
Shouldered Shaft
3040015037426 015037426 596-7410507-5 596-7410332-4 B434-5410-4 B434-5412-5 7410332 7410507
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
1
Marketplace 3040-01-503-7426
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-503-7426 5+ Documents (More...)
596-7410507-5596-7410332-4B434-5410-4B434-5412-574103327410507 A shaft having two or more different
596-7410507-5596-7410332-4B434-5410-4B434-5412-574103327410507 A shaft having two or more different /
-12 596-7410507-7 596-7410332-6 B434-5410-6 B434-5412-7 7410507 7410332 A shaft having two or more different
-12596-7410507-7596-7410332-6B434-5410-6B434-5412-774105077410332 A shaft having two FedMall Updated
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-503-7426 Shouldered Shaft 3040015037426 015037426
-4 B434-5410-4 B434-5412-5 7410332 7410507 A shaft having two or more different diameters (greater than
B434-5410-A1 596-7410332 -59 B434-5410-59 B434-5412-16 596-7410507 596-7410332 A shaft having two or
-59 B434-5410-59 B434-5412-16 596-7410507 596-7410332 A https//www.nsnlookup.com /fsg-30/fsc-3040/us
-30 B434-5410-30 596-7409226-48 MS24391-8M 596-7410332 An item with a cylindrical shaped body having
-59 B434-5410-59 B434-5412-16 596-7410507 596-7410332 -2 B434-5412-A2 74103327410507 A grouping of two
Restrictions 3040-01-503-7426
3040-01-503-7426 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-503-7426
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-503-7426
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-503-7426
- Part Number
- Manufacturer
- Status
- 596-7410507-5
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 596-7410332-4
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- B434-5410-4
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- B434-5412-5
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- 7410332
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 7410507
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-503-7426
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Nickel Alloy K-500
- Material Document And Classification [MDCL]
- Qq-N-286, Form-2, Cond-Anl (Cd); Ah Fed Spec Single Material Response
- Surface Finish [CSYM]
- 16.0 Microinches
- First End Style [AAGZ]
- Circular Grooved And Externally Threaded
- First End Groove Width [AAHG]
- 0.1200 Inches Nominal
- First End Groove Diameter [AAHH]
- 1.1100 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 0.930 Inches Nominal
- First End Diameter [AMDL]
- 1.2500 Inches Nominal
- First End External Thread Length [AMEA]
- 0.930 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Splined (Straight)
- Second End Diameter [AMFZ]
- 1.4980 Inches Nominal
- Second End Spline Length [AMGA]
- 2.810 Inches Nominal
- Second End Spline Minor Diameter [AMGB]
- 1.4980 Inches Nominal
- Second End Spline Major Diameter [AMGC]
- 1.4980 Inches Nominal
- Second End Spline Quantity [BDSR]
- 10
- Largest Step Diameter [CSPY]
- 2.250 Inches Nominal
- Overall Length [ABHP]
- 16.875 Inches Nominal
- Step Quantity [ATPC]
- 8
- Special Features [FEAT]
- Next Higher Assembly: External Athwartship Drive Handling System Gearbox Assembly.
- End Item Identification [AGAV]
- Seawolf Class Submarine Ssn 23
- Part Name Assigned By Controlling Agency [CXCY]
- Shaft Gear Input
Weapon Systems (WSDC) 3040-01-503-7426
DLA Procurement Analysis 3040-01-503-7426
- Last Stock Position:
- 4 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-503-7426
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-503-7426
Freight Information 3040-01-503-7426
3040-01-503-7426 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-503-7426 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-503-7426 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-503-7426 is not classified as a special type of cargo when transported by water. 3040-01-503-7426 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-503-7426
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- ASTM - D5118, Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-503-7426 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: