Premium Information is available for this item - Upgrade for $1 a day
3040-01-503-6400
Shouldered Shaft
3040015036400 015036400 596-7410507-16 596-7410332-59 B434-5410-59 B434-5412-16 596-7410507 596-7410332
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-503-6400
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-503-6400 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-503-6400 RQST NE Updated Every Day 3040-01-503-6400 RQST
Updated Every Day 3040-01-503-6400 RQST NE Related Documents 3040-01-503-6400 5+ Documents ( More...
-59 B434-5410-59 B434-5412-16 596-7410507 596-7410332 A shaft having two or more different diameters
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-503-6400 Shouldered Shaft 3040015036400 015036400
-59 B434-5410-59 B434-5412-16 596-7410507 596-7410332 A shaft having two or more different diameters
-59 B434-5410-59 B434-5412-16 596-7410507 596-7410332 https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365
-12 596-7410507-7 596-7410332-6 B434-5410-6 B434-5412-7 7410507 7410332 A shaft having two or more different
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-503-6400 Shouldered Shaft 3040015036400 015036400
/fsg-31/fsc-3110/us
Day 3110-01-503-2751 RQST NE Related Documents https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-503-6400
Shouldered Shaft 3040015036400 015036400 503-6400 Shouldered Shaft 3040015036400015036400 https
Restrictions 3040-01-503-6400
3040-01-503-6400 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-503-6400
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-503-6400
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-503-6400
- Part Number
- Manufacturer
- Status
- 596-7410507-16
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 596-7410332-59
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- B434-5410-59
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- B434-5412-16
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- 596-7410507
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 596-7410332
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-503-6400
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Gear Box Assembly Nsn:3020-01-503-1543 And Nsn:3010-01-503-3377 For External Athwartship Drive Handling System For Seawolf Class Ssn 23
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 1.4960 Inches Minimum And 1.4980 Inches Maximum
- First End Spline Minor Diameter [AMDN]
- 1.2740 Inches Minimum And 1.2840 Inches Maximum
- First End Spline Quantity [BDSQ]
- 10
- First End Style [AAGZ]
- Splined (Straight)
- First End Spline Length [AMDM]
- 3.000 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 1.4960 Inches Minimum And 1.4980 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-N-286,Form 2,Cond:Anealed & Age Hardened, Finish B Fed Spec Single Material Response
- Material [MATT]
- Nickel Alloy K-500
- Largest Step Diameter [CSPY]
- 2.500 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 1.380 Inches Nominal
- Second End External Keyway Length [AMFS]
- 1.943 Inches Nominal
- Second End External Thread Length [AMHA]
- 1.380 Inches Nominal
- Second End Diameter [AMFZ]
- 1.8760 Inches Minimum And 1.8765 Inches Maximum
- Second End Style [AAHP]
- Circular Grooved Flat Keyway And Externally Threaded
- Second End Groove Diameter [AAHX]
- 1.6400 Inches Nominal
- Second End Groove Width [AAHW]
- 0.1200 Inches Nominal
- Second End Keyway Depth [AMFT]
- 0.2910 Inches Minimum And 0.2965 Inches Maximum
- Second End Keyway Width [AMFR]
- 0.4990 Inches Minimum And 0.5010 Inches Maximum
- Special Features [FEAT]
- 1.750-16Un-3A Threaded Second End Of Shaft
- Overall Length [ABHP]
- 21.380 Inches Nominal
- Part Name Assigned By Controlling Agency [CXCY]
- Shaft,Output
- Step Quantity [ATPC]
- 11
- Surface Finish [CSYM]
- 16.0 Microinches
Weapon Systems (WSDC) 3040-01-503-6400
DLA Procurement Analysis 3040-01-503-6400
Management Data 3040-01-503-6400
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-503-6400
Freight Information 3040-01-503-6400
3040-01-503-6400 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-503-6400 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-503-6400 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-503-6400 is not classified as a special type of cargo when transported by water. 3040-01-503-6400 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-503-6400
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 2, Corrosion Preventive, Solvent Cutback, Cold Application, Soft Film
- --
- --
- --
- ASTM - D5118, Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-503-6400 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: