Premium Information is available for this item - Upgrade for $1 a day
3040-01-503-4351
Shouldered Shaft
3040015034351 015034351 596-7409226-8 B434-2420-8 7409226
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-503-4351
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-503-4351 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-503-4351 RQST NE Updated Every Day 3040-01-503-4351 RQST
Updated Every Day 3040-01-503-4351 RQST NE Related Documents 3040-01-503-4351 5+ Documents ( More...
B434-2420-8 7409226 A shaft having two or more https//www.nsnlookup.com /fsg-30/fsc-3040 https//www.nsnlookup.com
Shouldered Shaft 3040015034351 015034351 $1 a day Upgrade your Account Upgrade 3040-01-503-4351Shouldered
a day Upgrade your Account Upgrade 3040-01-503-4351Shouldered Shaft3040015034351 015034351 596-7409226
-8 B434-2420-8 7409226 A shaft having two or more different diameters (greater than 0.031 inches (0.79
/fsg-25/fsc-2520/us
day Upgrade your Account Upgrade 3010-01-503-2490Gear Assembly Carrier3010015032490 015032490 596-7409226
day Upgrade your Account Upgrade 3010-01-503-2574Gear Assembly Carrier3010015032574 015032574 596-7409226
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-503-4351 Shouldered Shaft 3040015034351 015034351
$1 a day Upgrade your Account Upgrade 3040-01-503-4351Shouldered Shaft3040015034351 015034351 596-7409226
Restrictions 3040-01-503-4351
3040-01-503-4351 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-503-4351
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-503-4351
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-503-4351
- Part Number
- Manufacturer
- Status
- 596-7409226-8
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- B434-2420-8
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- 7409226
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-503-4351
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Nickel Alloy
- Material Document And Classification [MDCL]
- Qq-N-286, Form 2, Cond-Anl, Ah Fin-A Fed Spec Single Material Response
- Surface Finish [CSYM]
- 16.0 Microinches
- First End Style [AAGZ]
- Square (Round Corners)
- First End Diameter [AMDL]
- 4.0000 Inches Nominal
- First End Width Across Flats [ACKY]
- 2.750 Inches Nominal
- First End Step Length [CSQZ]
- 2.874 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Plain
- Second End Diameter [AMFZ]
- 4.1353 Inches Nominal
- Largest Step Diameter [CSPY]
- 4.250 Inches Nominal
- Overall Length [ABHP]
- 14.280 Inches Nominal
- Step Quantity [ATPC]
- 5
- Special Features [FEAT]
- Shaft Has One Keyseat 1.000 X 3.00.
- End Item Identification [AGAV]
- Seawolf Class Submarine Ssn 23
- Part Name Assigned By Controlling Agency [CXCY]
- Shaft, Worm Gear
DLA Procurement Analysis 3040-01-503-4351
Management Data 3040-01-503-4351
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-503-4351
Freight Information 3040-01-503-4351
3040-01-503-4351 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-503-4351 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-503-4351 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-503-4351 is not classified as a special type of cargo when transported by water. 3040-01-503-4351 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-503-4351 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: