Premium Information is available for this item - Upgrade for $1 a day
3040-01-503-3138
Shouldered Shaft
3040015033138 015033138 596-7410249-45 B831-9511-45 7410249
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-503-3138
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-503-3138 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-503-3138 RQST NE Updated Every Day 3040-01-503-3138 RQST
Updated Every Day 3040-01-503-3138 RQST NE Related Documents 3040-01-503-3138 5+ Documents ( More...
thread (s) on a portion of its outer surface -97 B831-9511-97 596-7410249 https//www.nsnlookup.com /
-43 B831-9511-43 7410249 A shaft having two or more different diameters (greater than 0.031 inches (
/fsg-53/fsc-5340/us
-43 B831-9511-43 7410249 A shaft having two or more different diameters (greater than 0.031 inches (
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-503-3138 Shouldered Shaft 3040015033138 015033138
/fsg-53/fsc-5340/us
An antifriction bearing having a cylindrical rolling 596-7410249 A drive A detachable part in or on
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-503-3138 Shouldered Shaft 3040015033138 015033138
/fsg-53/fsc-5340/us
Shouldered Shaft 3040015033138 015033138 -88 a day Upgrade your Account Upgrade 5340-01-511-7541Bumper5340015117541
015117541 B831-9511-88 596-7410249 A detachable part in or on which a journal, gudgeon, pivot, or the
Restrictions 3040-01-503-3138
3040-01-503-3138 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-503-3138
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-503-3138
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-503-3138
- Part Number
- Manufacturer
- Status
- 596-7410249-45
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- B831-9511-45
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- 7410249
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-503-3138
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 304
- Material Document And Classification [MDCL]
- Qq-S-763, Class 304, Cond A Fed Spec Single Material Response
- First End Style [AAGZ]
- External Threaded
- First End Diameter [AMDL]
- 1.5753 Inches Nominal
- First End External Thread Length [AMEA]
- 0.940 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- External Threaded
- Second End Diameter [AMFZ]
- 1.3750 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.870 Inches Nominal
- Largest Step Diameter [CSPY]
- 2.500 Inches Nominal
- Overall Length [ABHP]
- 19.130 Inches Nominal
- Step Quantity [ATPC]
- 8
- Special Features [FEAT]
- There Is Also Two Key Ways On This Shaft
- End Item Identification [AGAV]
- Seawolf Class Ssn 23
- Part Name Assigned By Controlling Agency [CXCY]
- Vertical Pivot Pin
Weapon Systems (WSDC) 3040-01-503-3138
DLA Procurement Analysis 3040-01-503-3138
Management Data 3040-01-503-3138
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-503-3138
Freight Information 3040-01-503-3138
3040-01-503-3138 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-503-3138 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-503-3138 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-503-3138 is not classified as a special type of cargo when transported by water. 3040-01-503-3138 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-503-3138
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- Vendor's Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-503-3138 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: