Premium Information is available for this item - Upgrade for $1 a day
3040-01-500-7616
Shouldered Shaft
3040015007616 015007616 582-7067148-18 H615-2002-18 582-7067148
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-500-7616
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-500-7616 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-500-7616 RQST NE Updated Every Day 3040-01-500-7616 RQST
Updated Every Day 3040-01-500-7616 RQST NE Related Documents 3040-01-500-7616 5+ Documents ( More...
-7 582-7067148 H615-2002 https Linear Actuating Cylinder Cap 3040015007338 -70 H615-2002-70 582-7067148
-7 582-7067148 H615-2002 item https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-500-7616 Shouldered
-7 582-7067148 H615-2002 https Linear Actuating Cylinder Cap 3040015007338 -70 H615-2002-70 582-7067148
-7 582-7067148 H615-2002 item https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-500-7616 Shouldered
/fsg-31/fsc-3120/us
H615-2002 An item designed to enclose and support the internalpart -14 582-7067148 -7067148-7 582-7067148
Shouldered Shaft 3040015007616 015007616 $1 a day Upgrade your Account Upgrade 3040-01-500-7616Shouldered
015004233 582-7067148 -7 item designed to enclose and https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340
Linear Actuating Cylinder Cap 3040015007338 -70 H615-2002-70 582-7067148-7 https//www.nsnlookup.com
Restrictions 3040-01-500-7616
3040-01-500-7616 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-500-7616
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-500-7616
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-500-7616
- Part Number
- Manufacturer
- Status
- 582-7067148-18
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- H615-2002-18
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- 582-7067148
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-500-7616
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Capstan Assembly; Seawolf Class Ssn Submarine
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 1.5746 Inches Minimum And 1.5750 Inches Maximum
- First End Style [AAGZ]
- Plain
- Material Document And Classification [MDCL]
- Mil-P-22698 Ah-36 Mil Spec All Material Responses
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 2.497 Inches Minimum And 2.500 Inches Maximum
- Second End External Thread Length [AMHA]
- 1.500 Inches Nominal
- Second End Diameter [AMFZ]
- 1.7500 Inches Nominal
- Second End Style [AAHP]
- Externally And Internally Threaded
- Second End Internal Thread Length [AMHP]
- 0.620 Inches Nominal
- Overall Length [ABHP]
- 6.750 Inches Nominal
- Part Name Assigned By Controlling Agency [CXCY]
- Shaft, Idler
- Special Features [FEAT]
- Shaft Also Has A 2.5 Inch Length Keyway
- Step Quantity [ATPC]
- 7
DLA Procurement Analysis 3040-01-500-7616
Management Data 3040-01-500-7616
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-500-7616
Freight Information 3040-01-500-7616
3040-01-500-7616 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-500-7616 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-500-7616 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-500-7616 is not classified as a special type of cargo when transported by water. 3040-01-500-7616 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-500-7616 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: