Premium Information is available for this item - Upgrade for $1 a day
3040-01-498-9914
Shouldered Shaft
3040014989914 014989914 563-7066807-54 H552-0602-54 563-7066807
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-498-9914
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-498-9914 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-498-9914 RQST NE Updated Every Day 3040-01-498-9914 RQST
Updated Every Day 3040-01-498-9914 RQST NE Related Documents 3040-01-498-9914 5+ Documents ( More...
3040/us 3040-01-499-0553 Bell Crank 3040014990553 014990553 Vent Valve Nrp4820016179790 016179790 563-7066807
Control Lever 3040014991014 014991014 Vent Valve https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-498-9914
-01-499-1014 Remote Control Lever 3040014991014 014991014 Vent Valve Nrp4820016179790 016179790 563-7066807
www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-499-0553 Bell Crank 3040014990553 014990553 016179790 563-7066807
RQST NE Updated Every Day 4820-01-540-0926 RQST https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-498-9914
Shouldered Shaft 3040014989914 014989914 Active) Primary Buy RNCC 3 RNVC 2 DAC 5 563-7066807 https
Shouldered Shaft 3040014989914 014989914 $1 a day Upgrade your Account Upgrade 3040-01-498-9914Shouldered
Shaft3040014989914 014989914 563-7066807 -54 H552-0602-54 563-7066807 A shaft having two or more different
Restrictions 3040-01-498-9914
3040-01-498-9914 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-498-9914
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-498-9914
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-498-9914
- Part Number
- Manufacturer
- Status
- 563-7066807-54
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- H552-0602-54
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- 563-7066807
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-498-9914
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Vent Valve Assembly For Los Angeles Class Submarine (688)
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 1.7500 Inches Nominal
- First End External Thread Length [AMEA]
- 2.750 Inches Nominal
- First End Spline Minor Diameter [AMDN]
- 2.1280 Inches Minimum And 2.1430 Inches Maximum
- First End Spline Quantity [BDSQ]
- 10
- First End Style [AAGZ]
- Straight Splined And Externally Threaded
- First End Spline Length [AMDM]
- 4.125 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 2.4930 Inches Minimum And 2.4940 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-N-286 Form 2 Annealed,Hot Finished & Age Hardened Fed Spec Single Material Response
- Material [MATT]
- Nickel Alloy K-500
- Largest Step Diameter [CSPY]
- 2.495 Inches Minimum And 2.497 Inches Maximum
- Overall Length [ABHP]
- 30.500 Inches Nominal
- Part Name Assigned By Controlling Agency [CXCY]
- Shaft
- Special Features [FEAT]
- Between 1.750-5Unc-3A Threaded End And Straight Spline, 0.125 Wide X 1.500 Diameter Relief Groove Is Provided On Both Ends; Straight Splines Are Sae 10 B
- Step Quantity [ATPC]
- 9
- Surface Finish [CSYM]
- 32.0 Microinches
DLA Procurement Analysis 3040-01-498-9914
Management Data 3040-01-498-9914
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-498-9914
Freight Information 3040-01-498-9914
3040-01-498-9914 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-498-9914 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-498-9914 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-498-9914 is not classified as a special type of cargo when transported by water. 3040-01-498-9914 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-498-9914
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 33.0" H x -- W x -- L
- --
- --
- Physical Protection
- Any Suitable Process
- 33.0" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- ASTM - D5118, Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-498-9914 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: