Premium Information is available for this item - Upgrade for $1 a day
3040-01-498-9739
Shouldered Shaft
3040014989739 014989739 563-7066807-24 H552-0602-24 563-7066807
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-498-9739
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-498-9739 5+ Documents (More...)
United States (US) 4. 3040-01-498-9739 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 3040-01-498-9739 RQST NE Updated Every Day 3040-01-498-9739 RQST
https//www.nsnlookup.com /fsg-48/fsc-4810/us 4810-01-658-3383 Valve Seat 4810016583383016583383 563-7066807
3040-01-498-9946 Shouldered Shaft 3040014989946 014989946 3385Valve Seat4810016583385 016583385 563-7066807
https//www.nsnlookup.com /fsg-48/fsc-4810/us 4810-01-658-3390 Valve Seat 4810016583390016583390 563-7066807
Documents 4810-01-658-3390 4+ Documents ( More... https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-498-9739
3040-01-498-9739 Shouldered Shaft 3040014989739 014989739 3385Valve Seat4810016583385 016583385 2526Valve
Seat4820016752526 016752526 563-7066807 https//www.nsnlookup.com /fsg-48/fsc-4810/us 4810-01-658-3385
https//www.nsnlookup.com /fsg-48/fsc-4820/us 4820-01-675-2526 Valve Seat 4820016752526016752526 563-7066807
RQST NE Updated Every Day 4820-01-675-2526 RQST https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-498-9739
Restrictions 3040-01-498-9739
3040-01-498-9739 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-498-9739
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-498-9739
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-498-9739
- Part Number
- Manufacturer
- Status
- 563-7066807-24
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- H552-0602-24
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- 563-7066807
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-498-9739
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Vent Valve Assembly For Los Angeles Class Submarine (688)
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 1.7500 Inches Nominal
- First End External Thread Length [AMEA]
- 2.750 Inches Nominal
- First End Spline Minor Diameter [AMDN]
- 2.1280 Inches Minimum And 2.1430 Inches Maximum
- First End Spline Quantity [BDSQ]
- 10
- First End Style [AAGZ]
- Straight Splined And Externally Threaded
- First End Spline Length [AMDM]
- 4.125 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 2.4930 Inches Minimum And 2.4940 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-N-286 Form 2 Annealed,Hot Finished & Age Hardened Fed Spec Single Material Response
- Material [MATT]
- Nickel Alloy K-500
- Largest Step Diameter [CSPY]
- 2.495 Inches Minimum And 2.497 Inches Maximum
- Overall Length [ABHP]
- 25.500 Inches Nominal
- Part Name Assigned By Controlling Agency [CXCY]
- Shaft
- Special Features [FEAT]
- Between 1.750-5Unc-3A Threaded End And Straight Spline, 0.125 Wide X 1.500 Diameter Relief Groove Is Provided On Both Ends; Straight Splines Are Sae 10 B
- Step Quantity [ATPC]
- 9
- Surface Finish [CSYM]
- 32.0 Microinches
DLA Procurement Analysis 3040-01-498-9739
Management Data 3040-01-498-9739
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-498-9739
Freight Information 3040-01-498-9739
3040-01-498-9739 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-498-9739 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-498-9739 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-498-9739 is not classified as a special type of cargo when transported by water. 3040-01-498-9739 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-498-9739 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: