Premium Information is available for this item - Upgrade for $1 a day
3040-01-498-2106
Mechanically Actuated Spindle
3040014982106 014982106 12755-1 B-801-12755-1 B-830-22100 ITEM 4 12755 22100
A drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL) View more Mechanically Actuated Spindle
May 2023
1
Marketplace 3040-01-498-2106
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 3040-01-498-2106 5+ Documents (More...)
Mechanically Actuated Spindle 3040014982106 12755-1B-801-12755-1B-830-22100 ITEM 42210012755 A drive
NS Request Quotation 22100 SPINDLE Mechanically Actuated Spindle 304001498210612755-1B-801-12755-1B-
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 12755
-1 POWER SUPPLY 6 EA NS Request Quotation Subscribe to View Vendor Details... 12755-1 POWER SUPPLY 11
014982106 12755-1 B-801-12755-1 B-830-22100 2106Mechanically Actuated Spindle3040014982106 01498210612755
with machined bearing surface -3 B-801-12755-3 B-830-22100 ITEM 4 22100 12755 A drive shaft with external
-1 POWER SUPPLY 6 EA NS Request Quotation Subscribe to View Vendor Details... 12755-1 POWER SUPPLY 11
Upgrade your Account Upgrade 3040-01-498-2106Mechanically Actuated Spindle3040014982106 014982106 12755
-1 POWER SUPPLY 6 EA NS Request Quotation Subscribe to View Vendor Details... 12755-1 POWER SUPPLY 11
-2 12755 A drive shaft with external thread(s) and with machined bearing surface -3 B-801-12755-3 B-830
Restrictions 3040-01-498-2106
3040-01-498-2106 is a Mechanically Actuated Spindle that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-498-2106
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-498-2106
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-498-2106
- Part Number
- Manufacturer
- Status
- 12755-1
- Manufacturer
- 72166 - B.W. Elliott Manufacturing Co., Llc (Active)
- Primary Buy
- Primary Buy
- B-801-12755-1
- 72166 - B.W. Elliott Manufacturing Co., Llc (Active)
- Secondary Buy
- Secondary Buy
- B-830-22100 ITEM 4
- 72166 - B.W. Elliott Manufacturing Co., Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 12755
- 72166 - B.W. Elliott Manufacturing Co., Llc (Active)
- Informational Drawing
- Informational Drawing
- 22100
- 72166 - B.W. Elliott Manufacturing Co., Llc (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-498-2106
- Characteristic
- Specifications
- FIIG
- Specifications
- A517C0
- End Item Identification [AGAV]
- Remote Operating Station Nsn:3040-01-498-1916
- Material [MATT]
- Steel Corrosion Resisting
- Overall Length [ABHP]
- 6.380 Inches Nominal
- Special Features [FEAT]
- 7Larger End (1St):0.998 Inch Diameter; 0.501 Inch Diameter X 1.000 Inch Deep Blind Hole; 0.127 Wide Keyway; First End Also Has 0.940 Diameter X 0.047 Inch Wide Groove; And 0.190 Inch Diameter Chip Hole. Smaller End (2Nd): 0.625-11-Nc-2A X 0.906 Inch Long Threads Then Tapered Square 0.844 Inch Long X 0.750 Inch Across Flats, 0.750 Inch Per Foot Taper. Center Of Shaft Has 1.375-3-2A Left Hand Thread X 2.250 Inch Long; 1.375 Inch Largest Shaft Diameter; Total Four Steps. Material Is 303 Stainless Steel
Weapon Systems (WSDC) 3040-01-498-2106
DLA Procurement Analysis 3040-01-498-2106
Management Data 3040-01-498-2106
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-498-2106
Freight Information 3040-01-498-2106
3040-01-498-2106 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-498-2106 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-498-2106 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-498-2106 is not classified as a special type of cargo when transported by water. 3040-01-498-2106 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 3040-01-498-2106 1 Records
Contracting Technical Data File (CTDF) 3040-01-498-2106 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: