Premium Information is available for this item - Upgrade for $1 a day
3040-01-497-0022
Shouldered Shaft
3040014970022 014970022 122-4322586 PART 24 122-4322586
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-497-0022
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-497-0022 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-497-0022 RQST NE Updated Every Day 3040-01-497-0022 RQST
Updated Every Day 3040-01-497-0022 RQST NE Related Documents 3040-01-497-0022 5+ Documents ( More...
diameters (greater than 0.031 inches (0.79 PART 2 122-4322586-2 122-4322586 A drive shaft with external
thread(s) and with machined bearing PART PART 2 122-4322586-2 122-4322586 A drive shaft with external
-2 122-4322586 A drive shaft with external https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-497-0022
Shouldered Shaft 3040014970022 014970022 PART 24 122-4322586 A shaft having two or more different diameters
-2 122-4322586 A drive shaft with PART 2 122-4322586-2 122-4322586 A drive shaft with external thread
A gear with teeth on its outer surface in PART 2 122-4322586-2 122-4322586 A drive shaft with external
on its outer surface in PART 2 122-4322586-2122-4322586 A drive shaft with external /fsg-53/fsc-5340
/fsg-30/fsc-3040/us 3040-01-497-0022 Shouldered Shaft 3040014970022 014970022 with teeth on its outer
Restrictions 3040-01-497-0022
3040-01-497-0022 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-497-0022
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-497-0022
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-497-0022
- Part Number
- Manufacturer
- Status
- 122-4322586 PART 24
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 122-4322586
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-497-0022
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- Material Document And Classification [MDCL]
- Mil-S-22698 Mil Spec All Material Responses
- First End Style [AAGZ]
- External Threaded
- First End Diameter [AMDL]
- 0.6250 Inches Nominal
- First End External Thread Length [AMEA]
- 0.812 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Externally And Internally Threaded
- Second End Diameter [AMFZ]
- 0.6250 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.812 Inches Nominal
- Second End Internal Thread Length [AMHP]
- 1.000 Inches Nominal
- Largest Step Diameter [CSPY]
- 1.750 Inches Nominal
- Overall Length [ABHP]
- 16.187 Inches Nominal
- Step Quantity [ATPC]
- 6
- End Item Identification [AGAV]
- Door, Non-Ballistic; Cvn 76 Carrier.
- Part Name Assigned By Controlling Agency [CXCY]
- Spindle
DLA Procurement Analysis 3040-01-497-0022
Management Data 3040-01-497-0022
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-497-0022
Freight Information 3040-01-497-0022
3040-01-497-0022 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-497-0022 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-497-0022 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-497-0022 is not classified as a special type of cargo when transported by water. 3040-01-497-0022 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-497-0022
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 18.2" H x -- W x -- L
- --
- --
- Physical Protection
- Any Suitable Process
- 18.2" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- ASTM - D5118, Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-497-0022 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: