Premium Information is available for this item - Upgrade for $1 a day
3040-01-496-1890
Shouldered Shaft
3040014961890 014961890 581-6985420-8 218033192 H611-1404-8 581-6985420
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
1
Marketplace 3040-01-496-1890
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-496-1890 5+ Documents (More...)
(Identification) 1/2 NSN 3040-01-496-1890 (Identification) 2/2 - - 1.
BUY NE FedMall Updated Every Day 3040-01-496-1890 RQST NE Updated Every Day 3040-01-496-1890 RQST
581-6985420-8 218033192 https//www.nsnlookup.com /fsg-59/fsc-5905/ca 5905-21-440-0703 Lug Terminal 5905214400703
/fsg-59/fsc-5905/ca 5905-21-102-4011 Spanner Wrench 5905211024011 211024011 Shaft 5905218033192 218033192
-48 H611-1404-48 581-6985420 An item designed to be affixed to a base, forming a housing for a removable
/www.nsnlookup.com /fsg-31/fsc-3130/us 3130-01-496-0419 Pillow Block Cap 3130014960419014960419 581-6985420
-SA2 H611-1404-SA1 581-6985420 H611-1404 An assembly which consists of a SHAFT, SHOULDERED and components
/www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-495-1672 Shouldered Shaft Assembly 3040014951672 581-6985420
www.nsnlookup.com https//www.nsnlookup.com /fsg-59/fsc-5905/ca 5905-21-803-3192 Shouldered Shaft 5905218033192 218033192
1890Shouldered Shaft3040014961890 014961890 581-6985420-8 218033192 5905 Resistor from Canada (CA) 5905
Restrictions 3040-01-496-1890
3040-01-496-1890 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-496-1890
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-496-1890
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-496-1890
- Part Number
- Manufacturer
- Status
- 581-6985420-8
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 218033192
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- H611-1404-8
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- 581-6985420
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-496-1890
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Anchor & Anchor Chain Securing Mechanism Assembly; W/S:Los Angeles Class Ssn (688)
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 3.0000 Inches Nominal
- First End Step Length [CSQZ]
- 2.190 Inches Nominal
- First End Style [AAGZ]
- Square (Round Corners)
- First End Width Across Flats [ACKY]
- 0.998 Inches Minimum And 1.000 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-N-286,Form:2,Condition:Annealed&Age Hardened,Fin:B Fed Spec Single Material Response
- Material [MATT]
- Nickel Alloy
- Largest Step Diameter [CSPY]
- 3.000 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 1.340 Inches Nominal
- Second End External Keyway Length [AMFS]
- 2.125 Inches Minimum And 2.137 Inches Maximum
- Second End External Thread Length [AMHA]
- 1.340 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.5900 Inches Nominal
- Second End Diameter [AMFZ]
- 0.7500 Inches Nominal
- Second End Style [AAHP]
- Circular Grooved Flat Keyway And Externally Threaded
- Second End Groove Width [AAHW]
- 0.3000 Inches Nominal
- Second End Keyway Depth [AMFT]
- 0.197 Inches Minimum And 0.213 Inches Maximum
- Second End Keyway Width [AMFR]
- 0.3750 Inches Minimum And 0.3770 Inches Maximum
- Overall Length [ABHP]
- 12.640 Inches Nominal
- Special Features [FEAT]
- Second End Of Shaft Has 0.750-10 Unc-2B Threads; First End Chamfered 0.060 Inch X 45 Degrees And Second End Chamfered 0.080 Inch X 45 Degrees
- Specification/Standard Data [ZZZK]
- 81348-Qq-N-286,Form:2,Condition:Annealed & Age Hardened,Finish:B Government Specification
- Step Quantity [ATPC]
- 6
- Surface Finish [CSYM]
- 63.0 Microinches
Weapon Systems (WSDC) 3040-01-496-1890
DLA Procurement Analysis 3040-01-496-1890
- Last Stock Position:
- 7 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-496-1890
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-496-1890
Freight Information 3040-01-496-1890
3040-01-496-1890 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-496-1890 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-496-1890 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-496-1890 is not classified as a special type of cargo when transported by water. 3040-01-496-1890 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-496-1890
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 14.0" H x -- W x -- L
- --
- --
- Physical Protection
- Any Suitable Process
- 14.0" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- Vendor's Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Procurement History 3040-01-496-1890 3 Records
Contracting Technical Data File (CTDF) 3040-01-496-1890 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: