Premium Information is available for this item - Upgrade for $1 a day
3040-01-493-6119
Straight Shaft
3040014936119 014936119 122-2486639 PART NO. 19 2486639
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
1
Marketplace 3040-01-493-6119
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-493-6119 5+ Documents (More...)
/fsg-30/fsc-3040/us
BUY NE FedMall Updated Every Day 3040-01-493-6119 RQST NE Updated Every Day 3040-01-493-6119 RQST
Updated Every Day 3040-01-493-6119 RQST NE Related Documents 3040-01-493-6119 5+ Documents ( More...
PART NO. 7 122-2486639 A homogenous spherical body, a series of which provides the rolling elements
PART 122-2486639 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-493-6159 Remote Control Lever
/fsg-31/fsc-3120/us
PART NO. 7 122-2486639 A homogenous spherical body, a series of which provides the rolling elements
/www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-493-6119 Straight Shaft 3040014936119 014936119 for $1
/fsg-31/fsc-3120/us
PART NO. 31122-2486639 A tubular shaped unthreaded item with or without a flange at one United States
PART 122-2486639 PART NO. 7 122-2486639 A homogenous spherical body, a series of which provides the
Straight Shaft 3040014936119 014936119 item https//www.nsnlookup.com /fsg-30/fsc-3040/us https/
Upgrade your Account Upgrade 5360-01-493-4293Compression Helical Spring5360014934293 014934293 122-2486639
Restrictions 3040-01-493-6119
3040-01-493-6119 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-493-6119
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-493-6119
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-493-6119
- Part Number
- Manufacturer
- Status
- 122-2486639 PART NO. 19
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 2486639
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-493-6119
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- First End Style [AAGZ]
- Internal Threaded
- First End Diameter [AMDL]
- 1.3750 Inches Nominal
- First End Internal Thread Length [AMER]
- 4.5000 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Diameter [AMFZ]
- 1.3750 Inches Nominal
- Second End Grooved Flat Length [AMJA]
- 0.1562 Inches Nominal
- Second End Grooved Flat Depth [AMJB]
- 0.1250 Inches Nominal
- Overall Length [ABHP]
- 9.6250 Inches Nominal
- Special Features [FEAT]
- First End Has 1/8 Inch Npt Tap For Grease Fitting; Shaft Drilled Across Center 4 1/2 Inches From End 1/8 Inch Dia. For Greasing
- End Item Identification [AGAV]
- Aircraft Elevator 122-2268287, Elevators 1,2&3 Cv 67
DLA Procurement Analysis 3040-01-493-6119
Management Data 3040-01-493-6119
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-493-6119
Freight Information 3040-01-493-6119
3040-01-493-6119 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-493-6119 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-493-6119 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-493-6119 is not classified as a special type of cargo when transported by water. 3040-01-493-6119 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-493-6119 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: