Premium Information is available for this item - Upgrade for $1 a day
3040-01-489-5525
Shouldered Shaft
3040014895525 014895525 6744235-2 H5132402 6744235
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-489-5525
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-489-5525 5+ Documents (More...)
United States (US) 4. 3040-01-489-5525 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 3040-01-489-5525 RQST NE Updated Every Day 3040-01-489-5525 RQST
-3 6744235 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter
Shouldered Shaft 3040014895525 014895525 for $1 a day Upgrade your Account Upgrade 3040-01-489-
-1 H5132401 6744235 An item with an axial hole through which a piston rod slides.
Shouldered Shaft 3040014895525 014895525 for $1 a day Upgrade your Account Upgrade 3040-01-489-
Shouldered Shaft 3040014895525 014895525 for $1 a day Upgrade your Account Upgrade 3040-01-489-
5525Shouldered Shaft3040014895525 014895525 6744235 Flat Washer 5310014868258 014868258,6744235-7 Upgrade
ITEM 4 H5132404 6744235-4 An externally threaded fastener whose threaded portion is of one nominal diameter
https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305-01-487-1675 Machine Screw 5305014871675014871675 6744235
Restrictions 3040-01-489-5525
3040-01-489-5525 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-489-5525
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-489-5525
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-489-5525
- Part Number
- Manufacturer
- Status
- 6744235-2
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- H5132402
- 25685 - Naval Ship Engineering Center (Active)
- Secondary Buy
- Secondary Buy
- 6744235
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-489-5525
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Nickel Alloy
- Material Document And Classification [MDCL]
- Qq-N-286 Cl A Ah Cd Anl Mil Spec Single Material Response
- Largest Step Diameter [CSPY]
- 2.8750 Inches Nominal
- Overall Length [ABHP]
- 134.3100 Inches Nominal
- Step Quantity [ATPC]
- 5
- End Item Identification [AGAV]
- Los Angeles Class Ssn (688)
- Part Name Assigned By Controlling Agency [CXCY]
- Rod, Piston
DLA Procurement Analysis 3040-01-489-5525
Management Data 3040-01-489-5525
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-489-5525
Freight Information 3040-01-489-5525
3040-01-489-5525 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-489-5525 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-489-5525 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-489-5525 is not classified as a special type of cargo when transported by water. 3040-01-489-5525 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-489-5525
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 138.0" H x 7.0" W x 7.0" L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 138.0" H x 7.0" W x 7.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- --
- Cushion, Anchor, Block or Brace as Required
- --
- Any Suitable Wood Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-489-5525 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: