Premium Information is available for this item - Upgrade for $1 a day
3040-01-489-1098
Shouldered Shaft
3040014891098 014891098 7261661 PC 4 7261661
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
1
Marketplace 3040-01-489-1098
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-489-1098 5+ Documents (More...)
-2 7261661 A cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator
Upgrade for $1 a day Upgrade your Account Upgrade 5310-01-486-8253Flat Washer5310014868253 014868253 7261661
PC 3 7261661 An item with an axial hole through which a piston rod slides.
Upgrade for $1 a day Upgrade your Account Upgrade 5310-01-486-8253Flat Washer5310014868253 014868253 7261661
Restrictions 3040-01-489-1098
3040-01-489-1098 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-489-1098
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-489-1098
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-489-1098
- Part Number
- Manufacturer
- Status
- 7261661 PC 4
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 7261661
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-489-1098
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Copper
- Material Document And Classification [MDCL]
- Astm B-150, Alloy Uns 63200, Temper Tq50 Assn Std Single Material Response
- Surface Finish [CSYM]
- 32.0 Microinches
- First End Style [AAGZ]
- External Threaded
- First End Diameter [AMDL]
- 1.1250 Inches Nominal
- First End External Thread Length [AMEA]
- 1.625 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Largest Step Diameter [CSPY]
- 3.625 Inches Nominal
- Overall Length [ABHP]
- 17.560 Inches Nominal
- Step Quantity [ATPC]
- 6
- Special Features [FEAT]
- Part Of Periscope Fairing Hoist Cylinder
- End Item Identification [AGAV]
- Los Angeles Class Ssn (688)
- Supplementary Features [SUPP]
- 1St End Has 0.250 In. Bore. 2Nd End Is 3.37 In. Nom. Od, 2.751 In. Nom. Id
- Part Name Assigned By Controlling Agency [CXCY]
- Piston Kicker
Weapon Systems (WSDC) 3040-01-489-1098
DLA Procurement Analysis 3040-01-489-1098
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-489-1098
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-489-1098
Freight Information 3040-01-489-1098
3040-01-489-1098 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-489-1098 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-489-1098 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-489-1098 is not classified as a special type of cargo when transported by water. 3040-01-489-1098 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-489-1098
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 19.5" H x 5.7" W x 5.7" L
- --
- --
- --
- Any Suitable Process
- 19.5" H x 5.7" W x 5.7" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- ASTM - D5118, Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-489-1098 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: