Premium Information is available for this item - Upgrade for $1 a day
3040-01-486-6072
Shouldered Shaft
3040014866072 014866072 4112141-1 4112141
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-486-6072
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-486-6072 2+ Documents (More...)
Day 3040-01-486-6072 RQST Updated Every Day 3040-01-486-6072 RQST NE Related Documents 3040-01-486-6072
Sources Datasheet Management Day 3040-01-486-6072 RQST Updated Every Day 3040-01-486-6072 RQST NE Related
www.nsnlookup.com /fsg-36/fsc-3695/it 3695-15-106-7252 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-486-6072
Shouldered Shaft 3040014866072 014866072 for $1 a day Upgrade your Account Upgrade 3040-01-486-
Restrictions 3040-01-486-6072
3040-01-486-6072 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-486-6072
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-486-6072
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
- Poland (WP01)
- Effective Date:
- 1 Oct 2007
Approved Sources 3040-01-486-6072
- Part Number
- Manufacturer
- Status
- 4112141-1
- Manufacturer
- 1SR57 - Triumph Actuation Systems Llc (Active)
- Primary Buy
- Primary Buy
- 4112141-1
- 06848 - Honeywell International Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4112141
- 1SR57 - Triumph Actuation Systems Llc (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-486-6072
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Aircraft, F16
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 0.5500 Inches Nominal
- First End Spline Quantity [BDSQ]
- 12
- First End Style [AAGZ]
- Splined (Straight)
- First End Spline Major Diameter [AMDP]
- 0.5500 Inches Nominal
- First End Spline Minor Diameter [AMDN]
- 0.4850 Inches Minimum And 0.4950 Inches Maximum
- Material [MATT]
- Steel
- Material Document And Classification [MDCL]
- Ams 5622 Comp 630 17-4 Ph Assn Std Single Material Response
- Step Quantity [ATPC]
- 8
- Surface Finish [CSYM]
- 250.0 Microinches
Weapon Systems (WSDC) 3040-01-486-6072
DLA Procurement Analysis 3040-01-486-6072
Management Data 3040-01-486-6072
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3040-01-486-6072
Freight Information 3040-01-486-6072
3040-01-486-6072 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-486-6072 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-486-6072 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-486-6072 is not classified as a special type of cargo when transported by water. 3040-01-486-6072 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-486-6072
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Fiber Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-486-6072 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: