Premium Information is available for this item - Upgrade for $1 a day
3040-01-486-4314
Shouldered Shaft
3040014864314 014864314 342-7067322-69 H643-7003-69 H643-7003 7067322
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-486-4314
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-486-4314 5+ Documents (More...)
H643-7003-48 H643-7003-60 H643-7003-61 H643-7003-47 342-7067322-48L1 342-7067322-61L1 https//www.nsnlookup.com
-48 H643-7003-60 H643-7003-61 H643-7003-47 342-7067322-48L1 342-7067322-61L1 https//www.nsnlookup.com
/fsg-30/fsc-3040/us
/fsg-30/fsc-3040/us 3040-01-486-4314 Shouldered Shaft 3040014864314 014864314 -7003-60 H643-7003-61
-7067322-61 H643-7003-48 H643-7003-60 H643-7003-61 H643-7003-47 342-7067322-48L1 342-7067322-61L1 H643
/fsg-30/fsc-3040/us
-64 7067322H643 -7067322-61 H643-7003-48 H643-7003-60 H643-7003-61 H643-7003-47 342-7067322-48L1 342-
7067322-61L1 H643 -7003-48L1 H643-7003-60L1 H643-7003-61L1 342-7067322-47L1 H643-7003-47L1 342-7067322
-61 H643-7003-48 H643-7003-60 H643-7003-61 H643-7003-47 342-7067322-48L1 342-7067322-61L1 H643 -7003-
48L1 H643-7003-60L1 H643-7003-61L1 342-7067322-47L1 H643-7003-47L1 342-7067322 -48 H643-7003-60 https
/fsg-30/fsc-3040/us
H643-7003-60L1 H643-7003-61L1 342-7067322-47L1 H643-7003-47L1 342-7067322 https//www.nsnlookup.com -
61 H643-7003-47 342-7067322-48L1 342-7067322-61L1 H643-7003-48L1 -7067322- 342-7067322-48 342-7067322
Restrictions 3040-01-486-4314
3040-01-486-4314 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-486-4314
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-486-4314
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-486-4314
- Part Number
- Manufacturer
- Status
- 342-7067322-69
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- H643-7003-69
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- H643-7003
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
- 7067322
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-486-4314
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Los Angeles Class Ssn (688)
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.9970 Inches Minimum And 0.9980 Inches Maximum
- First End Spline Minor Diameter [AMDN]
- 0.8340 Inches Minimum And 0.8390 Inches Maximum
- First End Spline Quantity [BDSQ]
- 10
- First End Style [AAGZ]
- Splined (Straight)
- First End Spline Length [AMDM]
- 3.0000 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 0.9970 Inches Minimum And 0.9980 Inches Maximum
- Material [MATT]
- Copper Alloy 632
- Largest Step Diameter [CSPY]
- 2.2500 Inches Nominal
- Second End External Thread Length [AMHA]
- 1.5000 Inches Nominal
- Second End Diameter [AMFZ]
- 2.2500 Inches Nominal
- Second End Spline Major Diameter [AMGC]
- 0.8340 Inches Minimum And 0.8390 Inches Maximum
- Second End Style [AAHP]
- Externally And Internally Threaded
- Second End Internal Thread Length [AMHP]
- 2.2600 Inches Nominal
- Overall Length [ABHP]
- 8.1000 Inches Nominal
- Part Name Assigned By Controlling Agency [CXCY]
- Nut, Hull Valve Gagging
- Special Features [FEAT]
- Second End Has 0.300 Inch Counterbore 0.291 Inch Min., 0.321 Inch Max Deep 0.940 Inch From End. Shaft Has A 45 Degree Bevel Starting 2.620 Inch From Second End Tapering To First End Dia. Bevel Has 0.125 Inch Dia. Hole Drilled 0.500 Inch Down From Start Of Bevel Thru To Second End Counterbore.
- Step Quantity [ATPC]
- 3
Weapon Systems (WSDC) 3040-01-486-4314
DLA Procurement Analysis 3040-01-486-4314
Management Data 3040-01-486-4314
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-486-4314
Freight Information 3040-01-486-4314
3040-01-486-4314 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-486-4314 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-486-4314 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-486-4314 is not classified as a special type of cargo when transported by water. 3040-01-486-4314 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-486-4314
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- A-A-203, Kraft Wrapping Paper
- No Requirement
- Not Applicable
- MIL-DTL-117, Type III, Class C, Style 1, Medium Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- A-A-203, Kraft Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Procurement History 3040-01-486-4314 3 Records
Contracting Technical Data File (CTDF) 3040-01-486-4314 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: