Premium Information is available for this item - Upgrade for $1 a day
3040-01-483-5414
Shouldered Shaft
3040014835414 014835414 167-7066805-126 H547-2003-126 7066805
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-483-5414
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-483-5414 5+ Documents (More...)
https//www.nsnlookup.com /fsg 167-7066805-231 167-7066805 A tubular shaped item with a round or hexagon
A tubular -231 167-7066805 -213 H547-2003-213 H547-2003-231 167-7066805-231 167-7066805 A tubular shaped
-213 H547-2003-213 H547-2003-231 167-7066805-231 167-7066805 A tubular shaped item with a round or hexagon
-150 H547-2003-150 167-7066805 A tubular shaped item with a round or hexagon peripheral shape having
A tubular shaped item with a round or hexagon -150 H547-2003-150 167-7066805 A tubular -231 167-7066805
-231 167-7066805 A tubular shaped item with a round or hexagon -150 H547-2003-150 167-7066805 A tubular
/fsg-31/fsc-3120/us
-231 167-7066805 A tubular shaped item with a round or hexagon -150 H547-2003-150 167-7066805 A tubular
shaped item with a round or hexagon peripheral shape having -150 H547-2003-150 167-7066805 A tubular
A tubular -231 167-7066805 -213 H547-2003-213 H547-2003-231 167-7066805-231 167-7066805 A tubular shaped
A tubular -231 167-7066805 A tubular shaped item with a round or hexagon -150 H547-2003-150 167-7066805
Restrictions 3040-01-483-5414
3040-01-483-5414 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-483-5414
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-483-5414
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-483-5414
- Part Number
- Manufacturer
- Status
- 167-7066805-126
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- H547-2003-126
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- 7066805
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-483-5414
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Nickel Alloy
- Material Document And Classification [MDCL]
- Qq-N-286 Form 2 Anl Hf Ah Fed Spec Single Material Response
- Largest Step Diameter [CSPY]
- 4.7500 Inches Nominal
- Overall Length [ABHP]
- 19.0700 Inches Nominal
- Step Quantity [ATPC]
- 3
- End Item Identification [AGAV]
- Nssn Class Submarine; Lpt And Wst 30 In. Lower Hatch And Operator Assy
- Part Name Assigned By Controlling Agency [CXCY]
- Shaft, Gear
DLA Procurement Analysis 3040-01-483-5414
Management Data 3040-01-483-5414
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-483-5414
Freight Information 3040-01-483-5414
3040-01-483-5414 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-483-5414 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-483-5414 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-483-5414 is not classified as a special type of cargo when transported by water. 3040-01-483-5414 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-483-5414 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: