Premium Information is available for this item - Upgrade for $1 a day
3040-01-481-2251
Shouldered Shaft
3040014812251 014812251 8100-1253-0238 PT NO 571 8100-1253-0238
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
1
Marketplace 3040-01-481-2251
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-481-2251 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-481-2251 RQST NE Updated Every Day 3040-01-481-2251 RQST
Updated Every Day 3040-01-481-2251 RQST NE Related Documents 3040-01-481-2251 5+ Documents ( More...
a day Upgrade your Account Upgrade 3120-01-459-6257Nonmetallic Bushing3120014596257 014596257 8100-1253-0238
a day Upgrade your Account Upgrade 3120-01-459-6257Nonmetallic Bushing3120014596257 014596257 8100-1253-0238
/us 5310-01-480-7134 Flat Washer 5310014807134 014807134 PT NO 46 8100-1253-0238 SHEET 6 DET 6-F 8100
different diameters (greater than 0.031 inches FIND NO 572 8100-1253-0238 A shaft having two or
PT NO 98 8100-1253-0238 A headed, cylindrically-shaped item having a solid shank for fitting into
SHEET 6 DET 6-F 8100-1253-0238 Managed by United States NSN Created on https//www.nsnlookup.com
SHEET 6 DET 6-F 8100-1253-0238 Managed by United States NSN Created on /us 5310-01-480-7134 Flat
than 0.031 inches FIND NO 572 8100-1253-0238 A shaft having two or https//www.nsnlookup.com /fsg-53/
Restrictions 3040-01-481-2251
3040-01-481-2251 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-481-2251
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-481-2251
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-481-2251
- Part Number
- Manufacturer
- Status
- 8100-1253-0238 PT NO 571
- Manufacturer
- 70876 - Bath Iron Works Corporation (Active)
- Primary Buy
- Primary Buy
- 8100-1253-0238
- 70876 - Bath Iron Works Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-481-2251
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Scuttle
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.7500 Inches Nominal
- First End Groove Diameter [AAHH]
- 0.5938 Inches Nominal
- First End Groove Width [AAHG]
- 0.0938 Inches Nominal
- First End Keyway Depth [AMDG]
- 0.1250 Inches Nominal
- First End Keyway Width [AMCZ]
- 0.2500 Inches Minimum And 0.2550 Inches Maximum
- First End Distance From End To Groove [AMCY]
- 0.6880 Inches Nominal
- First End Distance From Hole Center To End [AMDZ]
- 0.3438 Inches Nominal
- First End Distance From Keyway Center To End [AMDH]
- 1.4219 Inches Nominal
- First End External Keyway Length [AMDE]
- 0.8438 Inches Nominal
- First End External Thread Length [AMEA]
- 0.6880 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved And Externally Threaded
- Material Document And Classification [MDCL]
- Sae-Ams-Qq-S-763 Assn Std Single Material Response
- Material [MATT]
- Steel Corrosion Resisting
- Largest Step Diameter [CSPY]
- 1.1230 Inches Minimum And 1.1240 Inches Maximum
- Second End Distance From Hole Center To End [AMGT]
- 0.6250 Inches Nominal
- Second End Diameter [AMFZ]
- 1.1230 Inches Minimum And 1.1240 Inches Maximum
- Second End Distance Between Hole Centers [AMHS]
- 7.2500 Inches Nominal
- Second End Style [AAHP]
- Plain
- Overall Length [ABHP]
- 16.4380 Inches Nominal
- Special Features [FEAT]
- First End Chamfered 45 Degrees 0.0938 Wide, Second End Chamfered 45 Degrees 0.1250 Wide
- Step Quantity [ATPC]
- 4
Weapon Systems (WSDC) 3040-01-481-2251
DLA Procurement Analysis 3040-01-481-2251
- Last Stock Position:
- 3 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-481-2251
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-481-2251
Freight Information 3040-01-481-2251
3040-01-481-2251 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-481-2251 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-481-2251 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-481-2251 is not classified as a special type of cargo when transported by water. 3040-01-481-2251 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-481-2251
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Vendor's Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Procurement History 3040-01-481-2251 1 Records
Contracting Technical Data File (CTDF) 3040-01-481-2251 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: