Premium Information is available for this item - Upgrade for $1 a day
3040-01-480-7942
Shouldered Shaft
3040014807942 014807942 122-2422339 PIECE 8
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-480-7942
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-480-7942 4+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-480-7942 RQST NE Updated Every Day 3040-01-480-7942 RQST
Updated Every Day 3040-01-480-7942 RQST NE Related Documents 3040-01-480-7942 4+ Documents ( More...
Shouldered Shaft 3040014807942 014807942 $1 a day Upgrade your Account Upgrade 3040-01-480-7942Shouldered
Shaft3040014807942 014807942 122-2422339 5310-01-480-5370 Hexagon Slotted Plain Nut 5310014805370 Reference
Shouldered Shaft 3040014807942 014807942 $1 a day Upgrade your Account Upgrade 3040-01-480-7942Shouldered
Shaft3040014807942 014807942 122-2422339 www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-480-7942 Shouldered
Shouldered Shaft 3040014807942 014807942 $1 a day Upgrade your Account Upgrade 3040-01-480-7942Shouldered
Shaft3040014807942 014807942 122-2422339 www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-480-7942 Shouldered
Restrictions 3040-01-480-7942
3040-01-480-7942 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-480-7942
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-480-7942
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-480-7942
- Part Number
- Manufacturer
- Status
- 122-2422339 PIECE 8
- Manufacturer
- 80064 - Naval Ship Systems Command (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-480-7942
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- First End Style [AAGZ]
- Indented Flat Keyway
- First End Keyway Width [AMCZ]
- 0.3750 Inches Nominal
- First End External Keyway Length [AMDE]
- 1.250 Inches Nominal
- First End Keyway Depth [AMDG]
- 1.748 Inches Nominal
- First End Distance From Keyway Center To End [AMDH]
- 1.260 Inches Nominal
- First End Diameter [AMDL]
- 1.9620 Inches Nominal
- First End Slot Depth [AMDW]
- 1.0000 Inches Nominal
- First End Slot Width [AKTM]
- 0.375 Inches Nominal
- First End Hole Diameter [AMDX]
- 3.5000 Inches Nominal
- First End Distance From Hole Center To End [AMDZ]
- 1.0000 Inches Nominal
- First End Distance Between Keyway Centers [AMES]
- 0.500 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Cross Drilled Hole And Slotted
- Second End Keyway Width [AMFR]
- 0.1860 Inches Nominal
- Second End Keyway Depth [AMFT]
- 0.500 Inches Nominal
- Second End Distance From Keyway Center To End [AMFW]
- 2.936 Inches Nominal
- Second End Diameter [AMFZ]
- 3.5000 Inches Nominal
- Second End Slot Depth [AMGR]
- 1.5000 Inches Nominal
- Second End Slot Width [AKTN]
- 0.719 Inches Nominal
- Second End Hole Diameter [AMGS]
- 2.0620 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 1.5000 Inches Nominal
- Largest Step Diameter [CSPY]
- 6.120 Inches Nominal
- Overall Length [ABHP]
- 8.620 Inches Nominal
- Step Quantity [ATPC]
- 3
- End Item Identification [AGAV]
- Hatch Cover
DLA Procurement Analysis 3040-01-480-7942
Management Data 3040-01-480-7942
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-480-7942
Freight Information 3040-01-480-7942
3040-01-480-7942 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-480-7942 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-480-7942 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-480-7942 is not classified as a special type of cargo when transported by water. 3040-01-480-7942 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-480-7942 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: