Premium Information is available for this item - Upgrade for $1 a day
3040-01-479-1480
Rigid Connecting Link
3040014791480 014791480 12417470-004 12417470
An item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified). View more Rigid Connecting Link
November 2023
3
Marketplace 3040-01-479-1480
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-479-1480 5+ Documents (More...)
-004 3040-01-479-1480 251 16 0FW39 12417471-003 5340-01-484-8692 251 20 0FW39 12417472-002 5340-01-376
/fsg-53/fsc-5340/us
-004 3040-01-479-1480 251 16 0FW39 12417471-003 5340-01-484-8692 251 20 0FW39 12417472 -002 5340-01-376
land/fmtv/technical-manual TM-9-2320-365-24P LMTV Parts Manual M1078 Series Page 994 197 6 19207 12417470
-004 3040-01-479-1480 188 16 0FW39 12417471-003 5340-01-484-8692 188 20 0FW39 12417472-002 5340-01-376
19207 12417470-004 251 17 5310-01-246-1387 62445 110 7289 251 18 5306-01-375-7128 19207 12417714
19207 12417470-004 188 17 5310-01-246-1387 62445 110 7289 188 18 5306-01-375-7128 19207 12417714
Restrictions 3040-01-479-1480
3040-01-479-1480 is a Rigid Connecting Link that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 3040-01-479-1480
- US Army (A920)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZ
- US Air Force (FXGC)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- FXAX
- US Marine Corps (MC40)
- Effective Date:
- 1 Aug 2009
- US Navy (N9BC)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Singapore (YJ01)
- Effective Date:
- 1 Apr 2008
Approved Sources 3040-01-479-1480
- Part Number
- Manufacturer
- Status
- 12417470-004
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- 12417470-004
- 076M6 - Bae Systems Land & Armaments L.P. (Active)
- Secondary Buy
- Secondary Buy
- 12417470-004
- 0FW39 - Bae Systems Tactical Vehicle Systems (Active)
- Secondary Buy
- Secondary Buy
- 12417470
- 19207 - U S Army Tank Automotive Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-479-1480
- Characteristic
- Specifications
- FIIG
- Specifications
- A524L0
- End Item Identification [AGAV]
- Family Of Medium Tactical Vehicles - Light; Chassis,Truck Nsn 2320-01-353-9098
- Body Construction [AZHL]
- Solid
- Body Thickness [ADPR]
- 0.1644 Inches Nominal
- Body Width [ADAT]
- 25.0 Millimeters Nominal
- Material [MATT]
- Steel
- Link Style [AJXT]
- Straight
- Material Document And Classification [MDCL]
- Astm A570, Gr 50 Assn Std Single Material Response Or Astm A570, Gr 36 Assn Std Single Material Response Or Astm A607,Gr 50 Assn Std Single Material Response Or Din 17100 St 37-2 National Spec Single Material Response
- Overall Length [ABHP]
- 255.0 Millimeters Nominal
- Part Name Assigned By Controlling Agency [CXCY]
- Arm Assembly Door Arrestor
- Special Features [FEAT]
- With Round Pin In Hole At One End
- Surface Treatment [SFTT]
- Zinc
Weapon Systems (WSDC) 3040-01-479-1480
DLA Procurement Analysis 3040-01-479-1480
- Last Stock Position:
- 473 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-479-1480
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 3040-01-479-1480
Freight Information 3040-01-479-1480
3040-01-479-1480 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095630. A Sub NMFC of X. It has a NMFC Description of LAP/CONNECTING LINKS/RINGS STEEL. 3040-01-479-1480 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50070 which rates the freight between FCL and LCL. 3040-01-479-1480 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 3040-01-479-1480 is not classified as a special type of cargo when transported by water. 3040-01-479-1480 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-479-1480
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- A-A-203, Kraft Wrapping Paper
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- A-A-203, Kraft Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Procurement History 3040-01-479-1480 3 Records
Contracting Technical Data File (CTDF) 3040-01-479-1480 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: