Premium Information is available for this item - Upgrade for $1 a day
3040-01-475-0009
Shouldered Shaft
3040014750009 014750009 H832-1651-14A 752-7068468-14 H832-1651
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-475-0009
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-475-0009 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-475-0009 RQST NE Updated Every Day 3040-01-475-0009 RQST
Updated Every Day 3040-01-475-0009 RQST NE Related Documents 3040-01-475-0009 5+ Documents ( More...
Shouldered Shaft 3040014750009 014750009 BUY NE FedMall Updated Every Day 3040-01-475-0009 RQST
NE Updated Every Day 3040-01-475-0009 RQST Updated Every Day 3040-01-475-0009 RQST NE Related Documents
-25 752-7068468-25 H832-1651 752-7068468 A metallic item, usually square or rectangular in cross
H832-1651-26 KEY,MACHINE 6 EA NS Request Quotation FedMall Updated Every 15 Minutes 5315-01-475-3194
//www.nsnlookup.com /fsg-31/fsc-3130/us 3130-01-698-7689 Pillow Block Cap 3130016987689016987689 H832-1651
Worm Gear 3020014749912014749912 RNVC 2 DAC 1 H832-1651 https//www.nsnlookup.com https//www.nsnlookup.com
Upgrade your Account Upgrade 5985-01-698-0921Antenna Pedestal Subassembly5985016980921 016980921 H832-1651
Shouldered Shaft 3040014750009 014750009 -14A 752-7068468-14 H832-1651 A shaft having two or more
Restrictions 3040-01-475-0009
3040-01-475-0009 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a US Munitions List Item and must be mutilated to scrap. This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-475-0009
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-475-0009
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-475-0009
- Part Number
- Manufacturer
- Status
- 752-7068468-14
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- H832-1651-14A
- 96169 - Electric Boat Corporation (Active)
- Advisory Reference
- Advisory Reference
- H832-1651
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-475-0009
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- Material Document And Classification [MDCL]
- Mil-S-5000, Cond E Mil Spec Single Material Response
- Special Features [FEAT]
- Remove All Burrs And Sharp Edges, And Where Machined Corner Or Fillet Radii Are Not Dimensioned, A .015 Maximum Radius Shall Be Used; Item Shall Have The Following Minumum Mechanical Properties: Yield Strength-130 Ksi, Ultimate Tensile Strength-150 Ksi And 14% Elongation
- End Item Identification [AGAV]
- Nssn Class Submarine
- Part Name Assigned By Controlling Agency [CXCY]
- Weapons Handling Athwartship Drive Gearbox Sub Assembly And Details
Weapon Systems (WSDC) 3040-01-475-0009
DLA Procurement Analysis 3040-01-475-0009
Management Data 3040-01-475-0009
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-475-0009
Freight Information 3040-01-475-0009
3040-01-475-0009 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-475-0009 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-475-0009 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-475-0009 is not classified as a special type of cargo when transported by water. 3040-01-475-0009 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-475-0009
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- A-A-203, Kraft Wrapping Paper
- No Requirement
- Not Applicable
- MIL-DTL-117, Type III, Class C, Style 1, Medium Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- A-A-203, Kraft Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-475-0009 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: