Premium Information is available for this item - Upgrade for $1 a day
3040-01-467-8848
Shouldered Shaft
3040014678848 014678848 123-4403556 PIECE 6 123-4403556 PIECE 6L1
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-467-8848
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-467-8848 3+ Documents (More...)
RQST NE Updated Every Day 3040-01-467-8848 RQST Updated Every Day 3040-01-467-8848 RQST NE Related Documents
3040-01-467-8848 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-467-8848
Shouldered Shaft 3040014678848 014678848 $1 a day Upgrade your Account Upgrade 3040-01-467-8848Shouldered
Shaft3040014678848 014678848 123-4403556 PIECE 6 123-4403556 PIECE 6L1 A shaft having two or more different
Shouldered Shaft 3040014678848 014678848 $1 a day Upgrade your Account Upgrade 3040-01-467-8848Shouldered
Shaft3040014678848 014678848 123-4403556 PIECE 6 123-4403556 PIECE 6L1 A shaft having two or more different
Restrictions 3040-01-467-8848
IUID Required
3040-01-467-8848 is a Shouldered Shaft that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a US Munitions List Item and must be mutilated to scrap. This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-467-8848
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-467-8848
- US Navy (N1H5)
- Effective Date:
- 1 Sep 1999
- Supplementary Receivers:
- GG
Approved Sources 3040-01-467-8848
- Part Number
- Manufacturer
- Status
- 123-4403556 PIECE 6
- Manufacturer
- 43689 - Huntington Ingalls Inc (Active)
- Incomplete Reference
- Incomplete Reference
- 123-4403556 PIECE 6L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-467-8848
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Criticality Code Justification [CRTL]
- Zzzy
- Reference Number Differentiating Characteristics [ZZZY]
- Quality Control Iaw Navships 0948-045-7010 Material Identification And Control Instruction For Level 1 Items
Management Data 3040-01-467-8848
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 3040-01-467-8848
Freight Information 3040-01-467-8848
3040-01-467-8848 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of A. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS S. 3040-01-467-8848 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. 3040-01-467-8848 is rated as class 85 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-467-8848 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-467-8848 is not classified as a special type of cargo when transported by water. 3040-01-467-8848 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-467-8848
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 2, Corrosion Preventive, Solvent Cutback, Cold Application, Soft Film
- MIL-PRF-121, Greaseproof, Waterproof Barrier
- ASTM-D4727, Fiberboard used as Pads, Cells, Die-cuts or Sleeves
- Not Applicable
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
- Open for inspection or use only
- MIL-PRF-121, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement