Premium Information is available for this item - Upgrade for $1 a day
3040-01-459-7676
Shouldered Shaft
3040014597676 014597676 8100-1251-0192 PC 127 8100-1251-0192
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
1
Marketplace 3040-01-459-7676
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-459-7676 5+ Documents (More...)
Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 8100-1251-0192
BUY NE FedMall Updated Every Day 3040-01-459-7676 RQST NE Updated Every Day 3040-01-459-7676 RQST
PC 104 8100-1251-0192 A shaft having two or more different diameters (greater than 0.031 inches
PC 104 8100-1251-0192 A shaft having two or more different diameters (greater than 0.031 inches
PC 104 8100-1251-0192 A shaft having two or more different diameters (greater than 0.031 inches
PC 104 8100-1251-0192 A shaft having two or more different diameters (greater than 0.031 inches
PC 104 8100-1251-0192 A shaft having two or more different diameters (greater than 0.031 inches
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-459-7676 Shouldered Shaft 3040014597676 014597676
PC 223 MOD 8100-1251-0192 A single or multi-piece item(s), curved PC 104 8100-1251-0192 A shaft
PC 104 8100-1251-0192 A shaft having two or more different diameters (greater than 0.031 inches
Restrictions 3040-01-459-7676
3040-01-459-7676 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-459-7676
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-459-7676
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-459-7676
- Part Number
- Manufacturer
- Status
- 8100-1251-0192 PC 127
- Manufacturer
- 70876 - Bath Iron Works Corporation (Active)
- Primary Buy
- Primary Buy
- 8100-1251-0192
- 70876 - Bath Iron Works Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-459-7676
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Arleigh Burke Class Ddg
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.8700 Inches Minimum And 0.8750 Inches Maximum
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel Comp 316
- Largest Step Diameter [CSPY]
- 0.998 Inches Minimum And 1.000 Inches Maximum
- Second End Distance From End To Groove [AMFQ]
- 1.125 Inches Nominal
- Second End External Keyway Length [AMFS]
- 2.219 Inches Nominal
- Second End External Thread Length [AMHA]
- 1.125 Inches Nominal
- Second End Diameter [AMFZ]
- 0.8750 Inches Nominal
- Second End Style [AAHP]
- Circular Grooved Flat Keyway And Externally Threaded
- Second End Groove Diameter [AAHX]
- 0.7188 Inches Nominal
- Second End Groove Width [AAHW]
- 0.1875 Inches Nominal
- Second End Keyway Depth [AMFT]
- 0.141 Inches Nominal
- Second End Keyway Width [AMFR]
- 0.2500 Inches Minimum And 0.2510 Inches Maximum
- Overall Length [ABHP]
- 9.625 Inches Nominal
- Special Features [FEAT]
- Second End Keyway Measurements Are For Four (4) Equal Sized Splines
- Step Quantity [ATPC]
- 2
Weapon Systems (WSDC) 3040-01-459-7676
DLA Procurement Analysis 3040-01-459-7676
- Last Stock Position:
- 11 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-459-7676
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-459-7676
Freight Information 3040-01-459-7676
3040-01-459-7676 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-459-7676 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-459-7676 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-459-7676 is not classified as a special type of cargo when transported by water. 3040-01-459-7676 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-459-7676
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- Vendor's Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 3040-01-459-7676 2 Records
Contracting Technical Data File (CTDF) 3040-01-459-7676 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: