Premium Information is available for this item - Upgrade for $1 a day
3040-01-454-1937
Shouldered Shaft
3040014541937 014541937 9325C02-1233-01 60002361 60001007 60002381
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
4
Marketplace 3040-01-454-1937
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-454-1937 2+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-454-1937 RQST NE Updated Every Day 3040-01-454-1937 RQST
Updated Every Day 3040-01-454-1937 RQST NE Related Documents 3040-01-454-1937 2+ Documents ( More...
7 | CRITICALITY : X | HMIC : N | PMIC : A | EDC https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-454-1937
Shouldered Shaft 3040014541937 014541937 Account Upgrade 3040-01-454-1937Shouldered Shaft3040014541937
Restrictions 3040-01-454-1937
3040-01-454-1937 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-454-1937
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-454-1937
- US Navy (N9BC)
- Effective Date:
- 1 Jun 2007
- Former MOE Rule:
- N1R5
- Supplementary Collaborators:
- GTKE
Approved Sources 3040-01-454-1937
- Part Number
- Manufacturer
- Status
- 9325C02-1233-01
- Manufacturer
- 20722 - The Entwistle Company Llc (Active)
- Primary Buy
- Primary Buy
- 60002361
- 64462 - Auburn Gear Inc (Active)
- Secondary Buy
- Secondary Buy
- 60001007
- 64462 - Auburn Gear Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 60002381
- 64462 - Auburn Gear Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-01-454-1937
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- Overall Length [ABHP]
- 12.370 Inches Nominal
- Special Features [FEAT]
- 14 Teeth;12/24 Spline Pitch;Gear Reduction 14.06:1
- End Item Identification [AGAV]
- Special Aircraft Support Equipment
- Supplementary Features [SUPP]
- Max.Inter.Otpt Torq50,000Lb.;Max.Input Speed 5000 Rpm
- Unit Of Issue Weight [SUWT]
- 95.00 Pounds
- Part Name Assigned By Controlling Agency [CXCY]
- Planetary Drive
Weapon Systems (WSDC) 3040-01-454-1937
DLA Procurement Analysis 3040-01-454-1937
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-454-1937
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- SX
- Special Aircraft and Engine Tool and Support Equipment/Parts
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 3040-01-454-1937
Freight Information 3040-01-454-1937
3040-01-454-1937 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-454-1937 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-454-1937 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-454-1937 is not classified as a special type of cargo when transported by water. 3040-01-454-1937 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-454-1937
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- MIL-PRF-22019, Transparent Volatile Corrosion Inhibitor Treated Barrier Material
- ASTM-D4727, Fiberboard used as Pads, Cells, Die-cuts or Sleeves
- --
- ASTM - D5118, Fiberboard Box
- No special marking
- MIL-PRF-22019, Transparent Volatile Corrosion Inhibitor Treated Barrier Material
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 3040-01-454-1937 3 Records
Contracting Technical Data File (CTDF) 3040-01-454-1937 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: