Premium Information is available for this item - Upgrade for $1 a day
3040-01-452-9064
Shouldered Shaft
3040014529064 014529064 211036219 801-6405530 FIND 2 DF2300-4411 FIND 2 6405530
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-452-9064
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-452-9064 5+ Documents (More...)
Every Day 3040-01-452-9064 RQST NE Updated Every Day 3040-01-452-9064 RQST Updated Every Day 3040-01
/fsg-30/fsc-3040/us 3040-01-452-9064 Shouldered Shaft 3040014529064014529064 211036219801-6405530 FIND
1010-21-103-6188 1010-21-103-6190 1010-21-103-6185 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-452-9064
Shouldered Shaft 3040014529064 014529064 3040-01-452-9064 3040014529064 014529064 is a shaft having
Documents 1010-21-103-6219 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-452-9064
Shouldered Shaft 3040014529064 014529064 for $1 a day Upgrade your Account Upgrade 3040-01-452-
FIND 1 801-6405530-1 6405530 A shaft having two or more different diameters (greater than 0.031 inches
FIND 1801-6405530-16405530 A shaft having two or more different diameters (greater BUY NE FedMall Updated
Shouldered Shaft 3040014529064 014529064 014264510,211036189 a day Upgrade your Account Upgrade
Restrictions 3040-01-452-9064
3040-01-452-9064 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-452-9064
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-452-9064
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-452-9064
- Part Number
- Manufacturer
- Status
- 211036219
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 801-6405530 FIND 2
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- DF2300-4411 FIND 2
- 43689 - Huntington Ingalls Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 6405530
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-452-9064
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- First End Style [AAGZ]
- Circular Grooved
- First End Groove Width [AAHG]
- 0.3090 Inches Nominal
- First End Groove Diameter [AAHH]
- 2.4990 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 0.9400 Inches Nominal
- First End Diameter [AMDL]
- 2.7390 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Circular Grooved And Internally Threaded
- Second End Groove Width [AAHW]
- 0.1200 Inches Nominal
- Second End Groove Diameter [AAHX]
- 2.4900 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 0.5600 Inches Nominal
- Second End Diameter [AMFZ]
- 2.5410 Inches Nominal
- Second End Internal Thread Length [AMHP]
- 1.3800 Inches Nominal
- Largest Step Diameter [CSPY]
- 2.7470 Inches Nominal
- Overall Length [ABHP]
- 33.8100 Inches Nominal
- Step Quantity [ATPC]
- 8
- End Item Identification [AGAV]
- Seawolf Class Ssn
Weapon Systems (WSDC) 3040-01-452-9064
DLA Procurement Analysis 3040-01-452-9064
Management Data 3040-01-452-9064
Navy
- Cognizance:
- 3B
NATO Stock Numbers Related to 3040-01-452-9064
Freight Information 3040-01-452-9064
3040-01-452-9064 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-452-9064 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-452-9064 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-452-9064 is not classified as a special type of cargo when transported by water. 3040-01-452-9064 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-452-9064
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 35.8" H x 4.8" W x 4.8" L
- --
- --
- --
- Any Suitable Process
- 35.8" H x 4.8" W x 4.8" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- ASTM - D5118, Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-452-9064 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: