Premium Information is available for this item - Upgrade for $1 a day
3040-01-450-2119
Shouldered Shaft
3040014502119 014502119 124-1553913 PAR 124-1553913 PART NO. 5 152-1091 PART NO. 5 1553913
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-450-2119
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-450-2119 5+ Documents (More...)
/fsc-3040/us 3040-01-450-2119 Shouldered Shaft 3040014502119014502119 124-1553913 PAR124-1553913 PART
Shaft 3040014502119014502119 124-1553913 PAR124-1553913 PART Day 3040-01-450-2119 RQST NE Updated Every
NO. 5 152-1091 PART NO. 5 1553913 A shaft having two or more different diameters https//www.nsnlookup.com
124-1553913 PAR 124-1553913 PART NO. 5 152-1091 PART NO. 5 1553913 A shaft having two or more different
PAR 124-1553913 PART NO. 5 152-1091 PART NO. 5 1553913 A shaft having two or more different diameters
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-450-2119 Shouldered Shaft 3040014502119 014502119
Shouldered Shaft 3040014502119 014502119 for $1 a day Upgrade your Account Upgrade 3040-01-450-
2119Shouldered Shaft3040014502119 014502119 124-1553913 PAR 124-1553913 PART NO. 5 152-1091 PART NO.
1553913 A shaft having two or more different diameters PAR 124-1553913 PART PAR 124-1553913 PART
NO. 5 152-1091 PART NO. 5 1553913 A shaft having two or more different diameters /www.nsnlookup.com
Restrictions 3040-01-450-2119
3040-01-450-2119 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-450-2119
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-450-2119
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTHD
Approved Sources 3040-01-450-2119
- Part Number
- Manufacturer
- Status
- 124-1553913 PART NO. 5
- Manufacturer
- 80064 - Naval Ship Systems Command (Active)
- Primary Buy
- Primary Buy
- 152-1091 PART NO. 5
- 43689 - Huntington Ingalls Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 124-1553913 PAR
- 80064 - Naval Ship Systems Command (Active)
- Advisory Reference
- Advisory Reference
- 1553913
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-450-2119
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- First End Style [AAGZ]
- Hexagonal
- First End Diameter [AMDL]
- 1.9380 Inches Nominal
- First End Width Across Flats [ACKY]
- 2.6250 Inches Nominal
- First End Step Length [CSQZ]
- 1.1250 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Circular Grooved And Externally Threaded
- Second End Groove Width [AAHW]
- 0.2500 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 1.6880 Inches Nominal
- Second End Diameter [AMFZ]
- 1.9380 Inches Nominal
- Second End External Thread Length [AMHA]
- 1.6880 Inches Nominal
- Overall Length [ABHP]
- 5.2500 Inches Nominal
- Step Quantity [ATPC]
- 4
- End Item Identification [AGAV]
- Nimitz Class Cvn
DLA Procurement Analysis 3040-01-450-2119
Management Data 3040-01-450-2119
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-450-2119
Freight Information 3040-01-450-2119
3040-01-450-2119 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-450-2119 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-450-2119 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-450-2119 is not classified as a special type of cargo when transported by water. 3040-01-450-2119 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-450-2119
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-450-2119 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: