Premium Information is available for this item - Upgrade for $1 a day
3040-01-449-9333
Shouldered Shaft
3040014499333 014499333 211071830 582-6408329 FIND 30 DF2012-72 FIND 30 6408329
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-449-9333
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-449-9333 5+ Documents (More...)
/fsg-30/fsc-3040/us 3040-01-449-9333 Shouldered Shaft 3040014499333014499333 211071830582-6408329 FIND
4SS 211069659SS 582-6408329 -6408329 FIND 4SS An item usually FIND 10 6408329 38 6408329 582-6408329
38 6408329 582-6408329 FN 4SS https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-449-9333 Shouldered
Shaft 3040014499333 014499333 FIND FIND 10 6408329 38 6408329 582-6408329 FN 4SS 211069659SS 582-6408329
-4653 Shouldered Shaft 3040013934653 013934653 6408329 FN 4SS582-6408329 FN 4SS211069659SS582-6408329
FIND 4SS An item usually FIND 10 6408329 6408329 FN 46408329 FN 4SS 582-6408329 FN FN 4 6408329 FN 4SS582
6408329 FN 4SS 582-6408329 FN 4SS 211069659SS FN 4SS 582-6408329 FN 4SS FIND 4SS An item usually FIND
10 6408329 38 6408329 582-6408329 FN 582-6408329 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01
FN 4SS 582-6408329 FN 4SS 211069659SS 582-6408329 FIND 4SS An item usually FIND 10 6408329 FN 10 582
10 6408329 38 6408329 -6408329 FN 4SS 211069659SS 582-6408329 FIND 4SS An item usually FIND 10 6408329
Restrictions 3040-01-449-9333
3040-01-449-9333 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-449-9333
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-449-9333
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-449-9333
- Part Number
- Manufacturer
- Status
- 211071830
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 582-6408329 FIND 30
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- DF2012-72 FIND 30
- 43689 - Huntington Ingalls Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 6408329
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-449-9333
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 17-4Ph
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 0.5000 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- External Threaded
- Second End Diameter [AMFZ]
- 0.2500 Inches Nominal
- Second End External Thread Length [AMHA]
- 1.5300 Inches Nominal
- Largest Step Diameter [CSPY]
- 0.5000 Inches Nominal
- Overall Length [ABHP]
- 3.3700 Inches Nominal
- Step Quantity [ATPC]
- 6
- End Item Identification [AGAV]
- Seawolf Class Ssn
DLA Procurement Analysis 3040-01-449-9333
Management Data 3040-01-449-9333
Navy
- Cognizance:
- 3B
Similar Supply Items to 3040-01-449-9333
Freight Information 3040-01-449-9333
3040-01-449-9333 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-449-9333 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-449-9333 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-449-9333 is not classified as a special type of cargo when transported by water. 3040-01-449-9333 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-449-9333
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Vendor's Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-449-9333 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: