Premium Information is available for this item - Upgrade for $1 a day
3040-01-449-2740
Shouldered Shaft
3040014492740 014492740 167-6404610-64 DF1502-238 FIND 64 6404610
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-449-2740
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-449-2740 5+ Documents (More...)
/fsg-30/fsc-3040/us 3040-01-449-2740 Shouldered Shaft 3040014492740014492740 167-6404610-64DF1502-238
ASSEMBLY 99SS 211085930SS 6404610 ASSY 99SS DF1502-238AY99SS ASSEMBLY 99 6404610 ASSY 99 167-6404610
FIND 138 167-6404610-138 6404610 Managed by United States NSN Created on 12 Jan 1998 Data Last Changed
ASSEMBLY 99SS 211085930SS 6404610 ASSY 99SS DF1502-238AY99SS ASSEMBLY 99 6404610 ASSY 99 167-6404610
FIND 65 6404610 FIND 65 167-6404556 FIND 65 211073373 167-6404610-65 A metallic item, usually square
FIND 656404610 FIND 65167-6404556 FIND 65211073373167-6404610-65 A metallic item, usually BUY NE FedMall
ASSEMBLY 996404610 ASSY 99167-6404610 ASSEMBLY 99SS211085930SS6404610 ASSY RQST NE Updated Every Day
Shouldered Shaft 3040014492740 014492740 211085930SS6404610 ASSY 99SSDF1502-238AY99SS https//www.nsnlookup.com
-103 DF1502-238 FIND 103 6404610 Managed by United States NSN Created on 12 Sep 1997 Data Last Changed
-103DF1502-238 167-6404610 ASSEMBLY 99SS 211085930SS 6404610 ASSY 99SS DF1502-238AY99SS ASSEMBLY 99 6404610
Restrictions 3040-01-449-2740
3040-01-449-2740 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-449-2740
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-449-2740
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDJB
Approved Sources 3040-01-449-2740
- Part Number
- Manufacturer
- Status
- 167-6404610-64
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- DF1502-238 FIND 64
- 43689 - Huntington Ingalls Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 6404610
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-449-2740
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Nickel Alloy
- Material Document And Classification [MDCL]
- Qq-N-286, Form 2, Cond Anl Fed Spec Single Material Response
- First End Style [AAGZ]
- Indented Flat Keyway
- First End Keyway Width [AMCZ]
- 0.7510 Inches Nominal
- First End External Keyway Length [AMDE]
- 3.7650 Inches Nominal
- First End Keyway Depth [AMDG]
- 0.4310 Inches Nominal
- First End Distance From Keyway Center To End [AMDH]
- 3.2930 Inches Nominal
- First End Diameter [AMDL]
- 3.0000 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Tongue Rounded Ends
- Second End Tongue Thickness [AMFX]
- 1.5080 Inches Nominal
- Second End Tongue Width [AMFY]
- 4.5000 Inches Nominal
- Second End Diameter [AMFZ]
- 4.5000 Inches Nominal
- Second End Step Length [CTBM]
- 0.7515 Inches Nominal
- Largest Step Diameter [CSPY]
- 4.5000 Inches Nominal
- Overall Length [ABHP]
- 21.1500 Inches Nominal
- Step Quantity [ATPC]
- 4
- End Item Identification [AGAV]
- Seawolf Class Ssn
DLA Procurement Analysis 3040-01-449-2740
Management Data 3040-01-449-2740
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-449-2740
Freight Information 3040-01-449-2740
3040-01-449-2740 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-449-2740 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-449-2740 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-449-2740 is not classified as a special type of cargo when transported by water. 3040-01-449-2740 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-449-2740
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 23.0" H x 6.5" W x 6.5" L
- --
- --
- --
- Any Suitable Process
- 23.0" H x 6.5" W x 6.5" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Vendor's Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-449-2740 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: