Premium Information is available for this item - Upgrade for $1 a day
3040-01-447-2720
Shouldered Shaft
3040014472720 014472720 006-NGD-002-300 N-996-65GC-A-001 ITEM 6 N999-65GC-A-001 PC. NO. 6 D-006-NGD-0-02-300 N999-65GC-A-001 N-996-65GC-A-001
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
1
Marketplace 3040-01-447-2720
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-447-2720 5+ Documents (More...)
NO. 6 D-006-NGD-0-02-300 N999-65GC-A-001 N-996-65GC-A-001 A shaft having two or more different diameters
BUY NE FedMall Updated Every Day 3040-01-447-2720 RQST NE Updated Every Day 3040-01-447-2720 RQST
) https//www.nsnlookup.com /fsg-53/fsc-5330/us 5330-01-453-9468 Gasket 5330014539468014539468 N999-65GC-A-001
RQST NE Updated Every Day 5330-01-453-9468 RQST https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-447-2720
5330014547329014547329 7329Gasket5330014547329 014547329A-073-NGC-0-04- 422073-NGC-004 -422 N-996-65GC-A-001
001 ITEM 20 10941 - Carver Pump Company (Active https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-447-2720
RQST NE Updated Every Day 5315-01-449-6726 RQST https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-447-2720
Shouldered Shaft 3040014472720 014472720 Primary Buy RNCC 3 RNVC 2 DAC 5 N-996-65GC-A-001 https
5330-01-447-3083 DEMIL: A | DEMILI : | CRITICALITY https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-447-2720
Shouldered Shaft 3040014472720 014472720 Primary Buy RNCC 3 RNVC 2 DAC 5 N-996-65GC-A-001 https
Restrictions 3040-01-447-2720
3040-01-447-2720 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-447-2720
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-447-2720
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-447-2720
- Part Number
- Manufacturer
- Status
- 006-NGD-002-300
- Manufacturer
- 10941 - Carver Pump Company (Active)
- Primary Buy
- Primary Buy
- N-996-65GC-A-001 ITEM 6
- 10941 - Carver Pump Company (Active)
- Secondary Buy
- Secondary Buy
- N999-65GC-A-001 PC. NO. 6
- 10941 - Carver Pump Company (Active)
- Secondary Buy
- Secondary Buy
- D-006-NGD-0-02-300
- 10941 - Carver Pump Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- N999-65GC-A-001
- 10941 - Carver Pump Company (Active)
- Informational Drawing
- Informational Drawing
- N-996-65GC-A-001
- 10941 - Carver Pump Company (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-447-2720
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Nickel Alloy
- Material Document And Classification [MDCL]
- Qq-N-281D, Cl A Or B Fed Spec Single Material Response
- First End Style [AAGZ]
- Flat Keyway
- First End Keyway Width [AMCZ]
- 0.2500 Inches Nominal
- First End External Keyway Length [AMDE]
- 2.8750 Inches Nominal
- First End Keyway Depth [AMDG]
- 0.1250 Inches Nominal
- First End Diameter [AMDL]
- 1.2500 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Circular Grooved Flat Keyway And Externally Threaded
- Second End Groove Width [AAHW]
- 0.0940 Inches Nominal
- Second End Groove Diameter [AAHX]
- 1.3440 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 0.5000 Inches Nominal
- Second End Keyway Width [AMFR]
- 0.2500 Inches Nominal
- Second End External Keyway Length [AMFS]
- 0.7500 Inches Nominal
- Second End Keyway Depth [AMFT]
- 0.1250 Inches Nominal
- Second End Diameter [AMFZ]
- 1.3719 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.5000 Inches Nominal
- Largest Step Diameter [CSPY]
- 1.8117 Inches Nominal
- Overall Length [ABHP]
- 29.4380 Inches Nominal
- Step Quantity [ATPC]
- 24
- End Item Identification [AGAV]
- Strategic Sealift Conversion Ships Class
Weapon Systems (WSDC) 3040-01-447-2720
DLA Procurement Analysis 3040-01-447-2720
Management Data 3040-01-447-2720
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-447-2720
Freight Information 3040-01-447-2720
3040-01-447-2720 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-447-2720 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-447-2720 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-447-2720 is not classified as a special type of cargo when transported by water. 3040-01-447-2720 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-447-2720
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 31.5" H x 4.0" W x 4.0" L
- --
- --
- --
- Any Suitable Process
- 31.5" H x 4.0" W x 4.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- ASTM-D4727, Fiberboard used as Pads, Cells, Die-cuts or Sleeves
- --
- ASTM - D5118, Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 3040-01-447-2720 3 Records
Contracting Technical Data File (CTDF) 3040-01-447-2720 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- R
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: