Premium Information is available for this item - Upgrade for $1 a day
3040-01-444-4165
Shouldered Shaft
3040014444165 014444165 C611-1404 FIND AHCA A8 6405751-AHCA-A8 581-6405751 FIND AHCA A8 6111404-A8 DF2011-237 FIND AHCA A8 6405751
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
1
Marketplace 3040-01-444-4165
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-444-4165 5+ Documents (More...)
3040-01-444-4165 Shouldered Shaft 3040014444165014444165 FIND AHCA A8 6405751-AHCA-A8 https//www.nsnlookup.com
1997 Data Last Changed FIN 581-6405751 FIND Restrictions 3040-01-444-4165 DEMIL: A | DEMILI : | CRITICALITY
FIND 8 581-6405751 A shaft having two or more different diameters (greater than 0.031 FIND 25 581-6405751
having two or more different diameters (greater than 0.031 FIND 25 581-6405751 FIND 8 581-6405751 A
/fsg-30/fsc-3040/us
AHCA FIND A6DF2011-237 FIND A6C611-1404 FIND A66405751 A gearshaft -AHCA-A6 581-6405751 AHCA FIND A6
DF2011-237 FIND A6C611-1404 FIND A66405751 A gearshaft with a single -A66405751 -AHCA-A6581-6405751
FIN581-6405751 FIND 8581-6405751 A shaft having two or more different diameters (greater BUY NE FedMall
Headless Straight Pin 5315014969570014969570 FIN 581-6405751 FIND 8581-6405751 A shaft having https
A shaft having two or more different diameters (greater than 0.031 FIN581-6405751 FIND 8581-6405751
A shaft having two or more -A7 6405751 Managed by United States NSN FIN581-6405751 /fsg-30/fsc-3020/us
Restrictions 3040-01-444-4165
3040-01-444-4165 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-444-4165
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-444-4165
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-444-4165
- Part Number
- Manufacturer
- Status
- C611-1404 FIND AHCA A8
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 6405751-AHCA-A8
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- 581-6405751 FIND AHCA A8
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 6111404-A8
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- DF2011-237 FIND AHCA A8
- 53689 - I-T-E Imperial Corp Sub Of Gould Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 6405751
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-444-4165
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Nickel Alloy
- Surface Finish [CSYM]
- 63.0 Microinches
- First End Style [AAGZ]
- Internal Threaded
- First End Diameter [AMDL]
- 0.7500 Inches Nominal
- First End Internal Thread Length [AMER]
- 1.3400 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Square (Round Corners)
- Second End Diameter [AMFZ]
- 3.0000 Inches Nominal
- Second End Width Across Flats [ACMD]
- 1.0000 Inches Nominal
- Second End Step Length [CTBM]
- 2.190 Inches Nominal
- Largest Step Diameter [CSPY]
- 3.000 Inches Nominal
- Overall Length [ABHP]
- 12.640 Inches Nominal
- Step Quantity [ATPC]
- 5
- End Item Identification [AGAV]
- Anchor And Anchor Chain Securing Mechanism Assy; W/S Sealwolf Class Ssn
Weapon Systems (WSDC) 3040-01-444-4165
DLA Procurement Analysis 3040-01-444-4165
Management Data 3040-01-444-4165
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-444-4165
Freight Information 3040-01-444-4165
3040-01-444-4165 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-444-4165 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-444-4165 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-444-4165 is not classified as a special type of cargo when transported by water. 3040-01-444-4165 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-444-4165
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- MIL-PRF-121, Greaseproof, Waterproof Barrier
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- MIL-PRF-121, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-444-4165 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: